does anyone know if these injectors will work ina 92-95 honda civic??
are the plugs the same??
i am pretty sure that i have to do alittle modifaction to make them fit but im not real sure.
any help is appreciated
thanks

 

Need a resistor pack from an older Honda to convert to P/H.

 

ok so where doe sthis resistor pack go?? on each injector?? or inthe harness??

 

The power wire from the injector harness (all 4) go into the box, them come out the other side and into the injectors.

 

yup they work but they are peak/hold injectors. Get yourself a resistor pack off a 4thgen civic and your set. Although running larger than 310cc injectors (I think, correct me if I'm wrong) on the stock ecu is not going to happen.

I'm picking up 450cc DSM's off a 1G talon for free. Next winter I'll buy a hondata, pop them in and I'm good to go.

 

You can also get the resistor pack from any 2nd Gen (88-91) CRX Si or HF.

You can run the 450's on stock ECU, but you will need to turn down the fuel pressure and you will run rich as the dickens. A SAFC can solve that problem.

Randy

 

So are ALL DSM injectors Peak/Hold? I know alot of folks run the 1st gen injectors, how about the 2G ones, from a 99GSX? I have a PRE 92 so Peak/Holds are what I need. TIA.

 

I believe the 2G and 1G 450cc injectors are the same.. someone please verify this.