-94 D16Z6 Sohc Vtec (pulled for B16 swap) - $300
-92-95 Si Hatch Trans (shorter 5th than ex) w/ starter - $250
-2000 DX 5-spd Trans - $150
-92-95 D15w/Vtec Head - $200
-Megan Racing JDM Type-R Replica Stainless Headers BRAND NEW - $130
-Hydro LS Integra Tranny (Perfect - No Grinds) - $SOLD
-2.5" Intercooler Piping for 92-00 Civic & 94-01 Integra NEW (No BOV Flange) - $175
-D16z6 Vtec Head w/ Crower 59300 Cam w/ Under 500miles use (resurfaced and ready to bolt on) - $300
-T3/T04e Turbo 57trim 50/63 stage 3 wheel - $450 or trade for b16 tranny
-T3/T04b Turbo 48,49trim? - .70/63 - $350
-Tial STYLE Wastegate New (don't know what spring, prob 8.5psi though) - $100
-Misc Sohc Parts - Flywheels, Oem Clutches (w/life left), Alternators, Starters
-stock sohcvted/d16z6 heads $150
-D16y8 Sohcvtec Intake Manifold - $60
-D16z6 complete block w/rusty sleeves (sat outside for a few months) good for sleeving or can just be honed... - $60


buy this stuff so I can see the floor of my garage
I'm in socal... local pickup preferred, paypal accepted...



Modified by used2baracer at 9:57 PM 6/3/2005

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by used2baracer &raquo;</TD></TR><TR><TD CLASS="quote">-94 D16Z6 Sohc Vtec (pulled for B16 swap) - $300
-92-95 Si Hatch Trans (shorter 5th than ex) w/ starter - $250
-2000 DX 5-spd Trans - $150
-92-95 D15w/Vtec Head - $200
-Megan Racing JDM Type-R Replica Stainless Headers BRAND NEW - $130
-Hydro LS Integra Tranny (Perfect - No Grinds) - $450 or trade for B16
-2.5" Intercooler Piping for 92-00 Civic & 94-01 Integra NEW (No BOV Flange) - $175-D16z6 Vtec Head w/ Crower 59300 Cam w/ Under 500miles use (resurfaced and ready to bolt on) - $300
-T3/T04e Turbo 57trim 50/63 stage 3 wheel - $450 or trade for b16 tranny
-T3/T04b Turbo 48,49trim? - .70/63 - $350
-Tial STYLE Wastegate New (don't know what spring, prob 8.5psi though) - $100
-Misc Sohc Parts - Flywheels, Oem Clutches (w/life left), Alternators, Starters

buy this stuff so I can see the floor of my garage
I'm in socal... local pickup preferred... </TD></TR></TABLE>

Where is mine.....

 

do you still want it? i can send it out tomorrow... pm me

 

up

 

pmed

 

pm sent

bumzor for you

 

what's the motors condition????

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMJNKY &raquo;</TD></TR><TR><TD CLASS="quote">what's the motors condition????</TD></TR></TABLE>

i pulled it out of a ex for a swap, had 8x,xxx miles. Looks good/clean... i'll try to get some pics up by this weekend.

 

bump

 

pmed I do want the engine!

 

how much for the complete head with intake manifold, intake exhaust, timing belt?basicly i would take everything exept the block. lmk and please show pics.

 

d16z6 head comes with all of that, except timing belt....

 

I will send you the $300 for the D16z6 Please pm me back so we can get this worked out.

THanks

 

do you have any pics?

 

hey I want the d16z6 i'll do $320 shipped

 

I'll do $300 and I will pick it up. For the complete motor.

 

you sir have pm ....... check it and get back with me asap.

 

check pms, i have money ready for the d16z6 swap