I just got alignment done on '99 Prelude. For example here is my TOE "before" and "after" on the front left wheel:

After Before Specified Range

0.03 -0.15 -0.08 0.08

My car is lowered about 1.5" front and 1.3" rear, and I don't have camber kit. I understand that TOE is the main thing that kills the tires. I hear a lot of people say that the TOE has to be zero out to prevent the inside wear. My question is that does it have to be exactly at 0 or just within the spec range is fine?



Modified by xbn83 at 3:01 PM 5/21/2005

 

0 would be the best, but the spec range is there for a reason, and it should be fine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xthephilx &raquo;</TD></TR><TR><TD CLASS="quote">0 would be the best, but the spec range is there for a reason, and it should be fine.</TD></TR></TABLE>

Thanks! The TOE on all 4 wheels is within spec, but some of the wheel's CAMBER isn't. Should I worry about that?

 

What are your specs on your camber?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lude_roller &raquo;</TD></TR><TR><TD CLASS="quote">What are your specs on your camber? </TD></TR></TABLE>

Specified Range Front:
-1.0 1.0

Mine:
Left -0.9
Right -1.5

Specified Range Rear:
-1.8 0.3

Mine:
Left -1.8
Right -2.1

Any comment or suggestion?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xbn83 &raquo;</TD></TR><TR><TD CLASS="quote">Specified Range Front:
-1.0 1.0

Mine:
Left -0.9
Right -1.5

Specified Range Rear:
-1.8 0.3

Mine:
Left -1.8
Right -2.1

Any comment or suggestion?</TD></TR></TABLE>

the rear is kind of off. 2 degrees is a lot.

 

Get that fixed.

 

bump