After assembling my JDM front end I had this plug that goes somewhere. It may be related to my A/C problem.

 

Looks like the plug that goes to the Washer Fluid Motor.

 

i thought those were two wire.....

 

Washer fluid works fine.

 

extra plug.

 

I'm sure it goes to something.

 

Looks like the fog light connector.

 

A little more information might be helpful as in where the other end of the wire is terminating. Is it going into a wire loom? It might be a plug for a fan up front, but most harness plugs look the same so its hard to tell.

 

it goes to the fogs i recently took mine off and remember what it looks like it should be running off the headlight harness

 

This is your OEM fog light connector.

 

*Food for though*

if its the fog light connecter shouldnt you have ended up with two identical connectors on each side????

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slperhybrid &raquo;</TD></TR><TR><TD CLASS="quote">*Food for though*

if its the fog light connecter shouldnt you have ended up with two identical connectors on each side???? </TD></TR></TABLE>

good thinking...is there another?

 

no its just runs off of the one side....it goes to the drivers side fog light then across the lower rad to the passnger side

 

BUTT-PLUG. Shame on me, but I didn't read every reply. Is that a 1 wire connector?

 

It's a 1 wire connector. It may be for OEM foglights. I don't know.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR.#1446 &raquo;</TD></TR><TR><TD CLASS="quote">no its just runs off of the one side....it goes to the drivers side fog light then across the lower rad to the passnger side</TD></TR></TABLE>

Correct.

 

I guess there's nothing to worry about. Thanks for the responses everybody.

 

'tis the relay wire for the fogs. Runs to the dash so you can plug a switch to it.


*answering the question that has already been answered*
Postcount +1