k20 heads, k24 block, jdm k20a-r header, and other k20 related parts.
Thread Starter
Honda-Tech Member
Joined: Oct 2002
Posts: 866
Likes: 0
From: sunvalley / reno, nevada, usa
k20 heads, k24 block, jdm k20a-r header, and other k20 related parts.
i have a some parts that i'm thinking about getting rid of...
now on ebay : http://cgi.ebay.com/ebaymotors...=WDVW : k20a head. off a jdm integra type r. just the head it self with springs, retainers, valves but no rockers, cams or cam trey. this head came with my swap and i took it off when i put my portflow head on.
$4oo : k20a2 head. same as above only it needs a few valves and maby valve seats. i also have some used stock valves that are good as new that will come with it if you like.
they would bolth be good for someone looking to get head work done and not wanting to sent in the head off there car to avoid down time.
4oo : taken apart k24. i have a k24 block that's been sitting in my shed for like a year and i don't paln on building it any more. it's all taken apart but looks fine. it consists of block, girtle, crank, rods, pistons, and some little things like timing chain cover and chain ect. there is one stripped out hole in the girtle that held the balance shafts on, it was stirpped before i got it but i didn't plan on running the balbance shafts so i bought it any ways to build it.
sold to DC5Dawg
: 3 piece cfr under drive pulley set.
sold to ruffRyno : type s intake manifold with throtle bodie.
i don't mind traids either. i could use a carbon trunk and hood for a 92 hatch, and some budy clubs seats too.
Modified by evilxkid at 1:11 PM 5/15/2005
now on ebay : http://cgi.ebay.com/ebaymotors...=WDVW : k20a head. off a jdm integra type r. just the head it self with springs, retainers, valves but no rockers, cams or cam trey. this head came with my swap and i took it off when i put my portflow head on.
$4oo : k20a2 head. same as above only it needs a few valves and maby valve seats. i also have some used stock valves that are good as new that will come with it if you like.
they would bolth be good for someone looking to get head work done and not wanting to sent in the head off there car to avoid down time.
4oo : taken apart k24. i have a k24 block that's been sitting in my shed for like a year and i don't paln on building it any more. it's all taken apart but looks fine. it consists of block, girtle, crank, rods, pistons, and some little things like timing chain cover and chain ect. there is one stripped out hole in the girtle that held the balance shafts on, it was stirpped before i got it but i didn't plan on running the balbance shafts so i bought it any ways to build it.
sold to DC5Dawg
: 3 piece cfr under drive pulley set. sold to ruffRyno
: type s intake manifold with throtle bodie.i don't mind traids either. i could use a carbon trunk and hood for a 92 hatch, and some budy clubs seats too.
Modified by evilxkid at 1:11 PM 5/15/2005
Thread Starter
Honda-Tech Member
Joined: Oct 2002
Posts: 866
Likes: 0
From: sunvalley / reno, nevada, usa
Re: (DC5Dawg)
they are red. i'll post some pics for you when i get a chance... ya they are for a k20. i never used them. i ordered black but got red so i never used them.
Trending Topics
Joined: Apr 2004
Posts: 39
Likes: 0
From: Las Vegas, NV, USA
Re: k20 heads, k24 block, jdm k20a-r header, and other k20 related parts. (evilxkid)
Hey im am intereseted in the k20a2 head do you still have it for sale if so send me an email: ranivus@gmail.com
Thread
Thread Starter
Forum
Replies
Last Post
memorybox
Honda CRX / EF Civic (1988 - 1991)
4
Jun 23, 2006 11:35 AM
WickidSi
Honda CRX / EF Civic (1988 - 1991)
1
Mar 2, 2003 09:42 AM
