hi everyone, i ran a T3 60/.48 on my car before it blew a seal. im going to be boosting again soon, and was wanting to know if anyone was running a T3/T4 50 or 57 trim with a .48 ar and what rpm's they would spool at, also i will be running a 2.5" downpipe. thanks

 

bump like to know also.

 

I"ll be installing this turbo on my d16y8 this friday. My turbo is a t3/t04e .50 a/r compressor housing, .48 a/r turbine housing, with a stage III turbine wheel and (i think) a 57 trim compressor wheel.

I'll tell you how it is, when its all said and done.

DAN

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VtecAdil &raquo;</TD></TR><TR><TD CLASS="quote">hi everyone, i ran a T3 60/.48 on my car before it blew a seal. im going to be boosting again soon, and was wanting to know if anyone was running a T3/T4 50 or 57 trim with a .48 ar and what rpm's they would spool at, also i will be running a 2.5" downpipe. thanks</TD></TR></TABLE>

JDMCRX is running a .51 a/r Comp .48 a/r Exh T3/T4, so he should know approx what rpm his D16 spools at

 

 

Im running a 60/48AR 57t. T3/T4 on my Y7 and I hit full boost around 5,000RPM(10psi) This is with a 2.5in open downpipe.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboTagTeam &raquo;</TD></TR><TR><TD CLASS="quote">Im running a 60/48AR 57t. T3/T4 on my Y7 and I hit full boost around 5,000RPM(10psi) This is with a 2.5in open downpipe.</TD></TR></TABLE>