T3/T4 on D16Y8
04-17-2005, 07:27 PM
#1
Thread Starter
Join Date: Apr 2004
Location: Lawrence/Olathe, KS, usa
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
T3/T4 on D16Y8
hi everyone, i ran a T3 60/.48 on my car before it blew a seal. im going to be boosting again soon, and was wanting to know if anyone was running a T3/T4 50 or 57 trim with a .48 ar and what rpm's they would spool at, also i will be running a 2.5" downpipe. thanks
04-18-2005, 04:28 AM
#3
Join Date: Oct 2004
Location: Mississauga, Ontario, Canada
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3/T4 on D16Y8 (oxSLEEPERxo)
I"ll be installing this turbo on my d16y8 this friday. My turbo is a t3/t04e .50 a/r compressor housing, .48 a/r turbine housing, with a stage III turbine wheel and (i think) a 57 trim compressor wheel.
I'll tell you how it is, when its all said and done.
DAN
I'll tell you how it is, when its all said and done.
DAN
04-18-2005, 05:01 AM
#4
Junior Member
Join Date: Feb 2004
Location: Ottawa, Ontario, Canada
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3/T4 on D16Y8 (VtecAdil)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VtecAdil »</TD></TR><TR><TD CLASS="quote">hi everyone, i ran a T3 60/.48 on my car before it blew a seal. im going to be boosting again soon, and was wanting to know if anyone was running a T3/T4 50 or 57 trim with a .48 ar and what rpm's they would spool at, also i will be running a 2.5" downpipe. thanks</TD></TR></TABLE>
JDMCRX is running a .51 a/r Comp .48 a/r Exh T3/T4, so he should know approx what rpm his D16 spools at
JDMCRX is running a .51 a/r Comp .48 a/r Exh T3/T4, so he should know approx what rpm his D16 spools at
04-19-2005, 06:51 AM
#7
Member
Join Date: Oct 2001
Posts: 3,350
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3/T4 on D16Y8 (TurboTagTeam)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboTagTeam »</TD></TR><TR><TD CLASS="quote">Im running a 60/48AR 57t. T3/T4 on my Y7 and I hit full boost around 5,000RPM(10psi) This is with a 2.5in open downpipe.</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
JDMRice
Forced Induction
7
09-12-2005 06:29 PM
TurboJesse
Forced Induction
6
03-24-2003 07:27 PM
