Anyone know if the TPS on the JDM 98spec R TB is riveted or screwed on??

 

It is screwed but you will need to cut notches to screw it out. Good luck!

 

so it has threads but no notches on the head??

 

Exactly

 

well aint that a bitch...Any suggestions on the easiest way to notch them?

 

Dremel or hack saw. Make an + so that you can use a phillips to get it out. If you search there are a million posts on this.

 

I can usually get them out with a pair of needle nose pliers. They're not particularly tight, so if you get a good grip on them with the pliers, they usually come out with relative ease.

 

What about using an easy out?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kendall &raquo;</TD></TR><TR><TD CLASS="quote">I can usually get them out with a pair of needle nose pliers. They're not particularly tight, so if you get a good grip on them with the pliers, they usually come out with relative ease.</TD></TR></TABLE>
I was looking for an answer like this. i dont want to take the TB off if i dont have to