All right guys, I'm trying to wire component speakers into Mike95Lude's 95 Vtec Prelude. I was wondering if you guys have any good ways to get wiring into the doors. I was thinking of just finding where the wires branch from one wire to two (one goes to the door speaker, one to the tweeter) but I can't find where that is either. Anyone have any suggestions on the best way to wire? I need to figure this out with the least possible time and effort...

Thanks in advance!

 

Oh also...if you are unsure of what i'm saying, IM me or post the question...don't just ignore my question if you don't fully understand it. I will do my best to elaborate on my question. Thanks

 

Yes please help us.

we are talking about installation of front component speakers in a 4th gen Lude.

ttt


[Modified by Mike95lude, 5:10 PM 1/29/2002]

 

I'm lost. You are looking for a way to get the wire from where to where?

From the head unit to the door? through the dash etc? Or are you using the stock wires and you're just looking for them?

Don't know if this is what you're asking, but try a coat hanger. That works for all kindsa sh*t....

 

Thanks for replying JG. I was beginning to wonder if anyone was gonna try.
Anyways, what I'm trying to do is find a way to get wires from the crossover to both the tweeter and the door speaker. I was thinking of putting the crossover behind the tweeter in the dash, but then I have to find a way to get to the wire that goes into the door for the door speaker. Do you possibly know where that runs? Is it in the kick panel, by the ECU? Or is it behind the dash? I can't find an effective wiring diagram in the Helms manual. It shows the harness design, but not where in the car the harness is routed.

Any help you can give is appreciated. I'd rather not spend a whole day tackling it.