I bought 880s from another htech member
there are supose to be 880s, and the parts numbers on the top
are
d141 25324745
2263 17113743
d141 25324746
2263 17113743

on the sides are etched
73.8 187
74.2 137
74.0 163
73.5 105

if 73.5= lbs/hour then they are 720 ccs, does this sound right or are these 880?

 

\
they look like these

accept the numbers (73.4 on the sides)

 

they look like msd's

Chris

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueHatch00 &raquo;</TD></TR><TR><TD CLASS="quote">they look like msd's

Chris</TD></TR></TABLE>

any ideas of size?

 

presicion

 

those look like Delphi injectors..

And it is about alittle more than 880cc.

http://www.racetronix.com/17113743FM.html

Static Flow Rate @ 43.5 PSI (300kPa) = 85.0 lb/hr / 10.7gm/sec / 893cc/min
Static Flow Rate @ 58.0 PSI (400kPa) = 98.1 lb/hr / 12.4gm/sec / 1031cc/min

So it just depends how much fuel pressure you run...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integlspwr2k &raquo;</TD></TR><TR><TD CLASS="quote">those look like Delphi injectors..

And it is about alittle more than 880cc.

http://www.racetronix.com/17113743FM.html

Static Flow Rate @ 43.5 PSI (300kPa) = 85.0 lb/hr / 10.7gm/sec / 893cc/min
Static Flow Rate @ 58.0 PSI (400kPa) = 98.1 lb/hr / 12.4gm/sec / 1031cc/min

So it just depends how much fuel pressure you run...</TD></TR></TABLE>

yeah but it says 73.4 which sounds like 720 cc 73.5x9.7 = about 720

 

msd, holley, precision, rochester....same ****

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist &raquo;</TD></TR><TR><TD CLASS="quote">

yeah but it says 73.4 which sounds like 720 cc 73.5x9.7 = about 720</TD></TR></TABLE>

hmm... well its up to you.. i guess its just how much fuel pressure you run though it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by legendboy &raquo;</TD></TR><TR><TD CLASS="quote">msd, holley, precision, rochester....same **** </TD></TR></TABLE>

i understand that all injectors are the same, i need to figure out the size of these injectors Anyone know what those number on them mean?

 

Those look like DELPHI 750cc's. I have a set of 950cc's and they too, have etched writings on it ("125-950").

 

does any one know how to use the part number on my injectors to figure out the ccs?

 

those injectors are actualy rochestor/delphi product.

25324746 17113743
part number is 85lb which is 880cc