who has measured their h-series deck hight?
who has measured their h-series deck hight?
NOT your friend, NOT your brother, first hand only.
common posting is 8.655...well i was talking to someone and they said it was 8.643...me wanting to get the specs of my new build exact, i had mine measured. h23a1 block benson sleeves 8.638! im guessing its been decked once...
we need a lot of people to go and measure stock ones, sleeved ones just for comparasion.
what gets me, is a lot of piston companies base it on 8.655, im surprised this hasn't come up as people have been doing clearence measurments and such.
common posting is 8.655...well i was talking to someone and they said it was 8.643...me wanting to get the specs of my new build exact, i had mine measured. h23a1 block benson sleeves 8.638! im guessing its been decked once...
we need a lot of people to go and measure stock ones, sleeved ones just for comparasion.
what gets me, is a lot of piston companies base it on 8.655, im surprised this hasn't come up as people have been doing clearence measurments and such.
Re: who has measured their h-series deck hight? (fastludeh22)
come on guys, 3 pages about a cup holder and nothing on something like this...what is this world coming to
Honda-Tech Member
Joined: Oct 2003
Posts: 3,732
Likes: 2
From: Betonwüsten, USA
Re: who has measured their h-series deck hight? (fastludeh22)
Well I am breaking your rule since I have never actually measured it but in my helm's manual it says 8.643" for the deck height and my calculations have resulted in similar measurements (Deck Height = [stroke/2] + rod + piston + PtoD clearance)
This site's use of the word "Tech" is a bit of a misnomer in this forum despite some people's efforts to the contrary. This forum has a lot of fluff, you might get better results in the All Motor forum but then again because you are talking about H-series you might get ignored. You could also PM some of the more knowledgeable people on this board and see if they can help you. Oaksracing is building a new motor so he might have the tools to get measurements you seek.
Pirate
This site's use of the word "Tech" is a bit of a misnomer in this forum despite some people's efforts to the contrary. This forum has a lot of fluff, you might get better results in the All Motor forum but then again because you are talking about H-series you might get ignored. You could also PM some of the more knowledgeable people on this board and see if they can help you. Oaksracing is building a new motor so he might have the tools to get measurements you seek.
Pirate
Honda-Tech Member
Joined: Feb 2005
Posts: 1,180
Likes: 1
From: Fontana, CA
Re: who has measured their h-series deck hight? (fastludeh22)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fastludeh22 »</TD></TR><TR><TD CLASS="quote">come on guys, 3 pages about a cup holder and nothing on something like this...what is this world coming to </TD></TR></TABLE>
thats what i was thinking
thats what i was thinking
Re: who has measured their h-series deck hight? (PirateMcFred)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PirateMcFred »</TD></TR><TR><TD CLASS="quote">Well I am breaking your rule since I have never actually measured it but in my helm's manual it says 8.643" for the deck height and my calculations have resulted in similar measurements (Deck Height = [stroke/2] + rod + piston + PtoD clearance)
</TD></TR></TABLE>
then why does the faq say 8.655?
also i guess if you have done reverse engineering that's ok also...ie measured how far out/in the hole a KNOWN piston crank and rod size combo...preferably a new rod that hasn't stretched yet
</TD></TR></TABLE>
then why does the faq say 8.655?
also i guess if you have done reverse engineering that's ok also...ie measured how far out/in the hole a KNOWN piston crank and rod size combo...preferably a new rod that hasn't stretched yet
Member
Joined: Mar 2002
Posts: 8,113
Likes: 3
From: East Village, NYC
Re: who has measured their h-series deck hight? (fastludeh22)
I can check my 95 helms too, 8.643" sounds familiar..
What, Rick Solis hasn't 3D mapped the entire H22 engine and figured this stuff out down to the micrometre yet? Sheesh what is the world coming to?!
What, Rick Solis hasn't 3D mapped the entire H22 engine and figured this stuff out down to the micrometre yet? Sheesh what is the world coming to?!
space cadet
Joined: Nov 2002
Posts: 6,091
Likes: 0
From: Spec Shakesland
Re: who has measured their h-series deck hight? (satan_srv)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by satan_srv »</TD></TR><TR><TD CLASS="quote">I can check my 95 helms too, 8.643" sounds familiar..
What, Rick Solis hasn't 3D mapped the entire H22 engine and figured this stuff out down to the micrometre yet? Sheesh what is the world coming to?! </TD></TR></TABLE>
wow, thats so cool of you to talk **** about someone you banned so they cant defend themselves
What, Rick Solis hasn't 3D mapped the entire H22 engine and figured this stuff out down to the micrometre yet? Sheesh what is the world coming to?!
</TD></TR></TABLE>wow, thats so cool of you to talk **** about someone you banned so they cant defend themselves
Trending Topics
Re: who has measured their h-series deck hight? (Shakes)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Shakes »</TD></TR><TR><TD CLASS="quote">
wow, thats so cool of you to talk **** about someone you banned so they cant defend themselves
</TD></TR></TABLE>
even funnier is that back in the day when i started this build, rick was the one who told me this 8.643, i was just tring to keep his name out of here so it wouldnt start another war in my theard.
But cp told me 8.655, and those are the pistons i have. JE, Wiseco, and many others also base it on this #. then i checked our faq and it said 8.655. so now that the 8.643 is proved, i wanted to compare others blocks.
BTW-WHY was rick banned?
wow, thats so cool of you to talk **** about someone you banned so they cant defend themselves
</TD></TR></TABLE>even funnier is that back in the day when i started this build, rick was the one who told me this 8.643, i was just tring to keep his name out of here so it wouldnt start another war in my theard.
But cp told me 8.655, and those are the pistons i have. JE, Wiseco, and many others also base it on this #. then i checked our faq and it said 8.655. so now that the 8.643 is proved, i wanted to compare others blocks.
BTW-WHY was rick banned?
space cadet
Joined: Nov 2002
Posts: 6,091
Likes: 0
From: Spec Shakesland
Re: who has measured their h-series deck hight? (fastludeh22)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fastludeh22 »</TD></TR><TR><TD CLASS="quote">
even funnier is that back in the day when i started this build, rick was the one who told me this 8.643, i was just tring to keep his name out of here so it wouldnt start another war in my theard.
But cp told me 8.655, and those are the pistons i have. JE, Wiseco, and many others also base it on this #. then i checked our faq and it said 8.655. so now that the 8.643 is proved, i wanted to compare others blocks.
BTW-WHY was rick banned? </TD></TR></TABLE>
without getting into crap, yes its 8.643 to the dot.
even funnier is that back in the day when i started this build, rick was the one who told me this 8.643, i was just tring to keep his name out of here so it wouldnt start another war in my theard.
But cp told me 8.655, and those are the pistons i have. JE, Wiseco, and many others also base it on this #. then i checked our faq and it said 8.655. so now that the 8.643 is proved, i wanted to compare others blocks.
BTW-WHY was rick banned? </TD></TR></TABLE>
without getting into crap, yes its 8.643 to the dot.
Member
Joined: Mar 2002
Posts: 8,113
Likes: 3
From: East Village, NYC
Re: who has measured their h-series deck hight? (Shakes)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Shakes »</TD></TR><TR><TD CLASS="quote">
wow, thats so cool of you to talk **** about someone you banned so they cant defend themselves
</TD></TR></TABLE>
haha blow me..you should get your facts straight
a. I never banned him, I never had ban rights
b. He's still on this board
c. how am I talking ****? He never made the thread he said he was going to
d. I hardly care as much as you seem to, maybe that's why I'm not here so much anymore...
wow, thats so cool of you to talk **** about someone you banned so they cant defend themselves
</TD></TR></TABLE>haha blow me..you should get your facts straight
a. I never banned him, I never had ban rights
b. He's still on this board
c. how am I talking ****? He never made the thread he said he was going to
d. I hardly care as much as you seem to, maybe that's why I'm not here so much anymore...
Thread
Thread Starter
Forum
Replies
Last Post
Innovation
Honda Prelude
105
Feb 9, 2017 06:15 AM
VWkila
Forced Induction
7
Mar 1, 2003 05:48 AM