Hey, i just got an 03 rsx-s, and the shift **** feels like i'm driving a bus. I am going to buy a VT short throw adaptor, but i was wondering if there was just a shorter shift shaft/pole so that the shift **** sits way lower? Something cheap will do :-D Thanks for any input.

 

not sure what you grew up driving but RSX shifter is already short.

if u need shorter, revo $100-120. or b&M $175-185

 

dood, the shift **** is like 6 inches above the console, on my del Sol it was like 2-3"

 

you can cut the pole shorter

 

but the threads are on top??

 

most aftermarket shift ***** come with allen keys to tighten it down threads arent needed

 

oem is threaded, oem a-spec is threaded, mugen is threaded, any decent ones are threaded, the ones that fall off use the allen key..

 

they're threaded so you can use them with the oem shaft, but if you want lower, get one with allen screws. I got the B&M and a **** and it's short as hell. BUT, our cars do have a shorter shaft than 90% of the cars out there

 

will the nuespeed adapter for the ep fit the dc5 shifter assembly?

 

ive had my allen key **** on for 3 1/2 years

 

Locktite the threads. They will not come out.