so we worked for about 4 hours, we are all a bunch of newbies so we tried to follow a writeup with directions. but anyway, we basically are unbolting everything we can putting it in a bag and labeling it. the hardest part about this is the wiring though, because im not going to remember what goes to what. any tips on the removal of the engine. we have gotten batt pipes radiator and everything else except for the engine tranny and shift linkage. the engine lift is coming tommorow!

 

sounds like a very fun job good luck with everything man hope it turns out real sweet

 

Once that hood is off and out of the way pop that baby out. Just make sure EVERYTHING is disconnected. don't wanna sit there scratching ur head wondering why the thing isn't out. Good luck, take your time, a few beer breaks and you're set.