i searched and didnt find exactly what i was looking for so for those who put the ctr cams in ur gsr i have a question. ive looked at several websites that outline the install process but they all differ. so is it necessary that i reset the timing, and mess with teh t belt tensioner cause some list it and some dont. also i just got a valve adjustment in dec should i have it done after i put them in.

 

http://www.c-speedracing.com/h...m.php

just go by that and you will be fine good luck

 

Swaping cams is going to require you to loosen up the tensionor and reset the belt. I would also do the valve lash again with the different cams.

 

Unless you are replacing the timing belt, it is not necessary to adjust the tensioner. When I installed my cams and valvesprings, I just slipped the cam with the gear attached back under the belt... positioned it, and put the cam caps back on. Has been working like a charm for like 20k.

 

all good to know, what about messin with the timing is that necessary

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2G0S0R1 &raquo;</TD></TR><TR><TD CLASS="quote">Unless you are replacing the timing belt, it is not necessary to adjust the tensioner. When I installed my cams and valvesprings, I just slipped the cam with the gear attached back under the belt... positioned it, and put the cam caps back on. Has been working like a charm for like 20k.</TD></TR></TABLE>


Well you can do it that way also, just becareful and make sure the engine is at TDC and the the cam gears say UP