GT35R's available!
Honda-Tech Member
Joined: Sep 2002
Posts: 4,414
Likes: 0
From: Bay Area, CA, US
Re: GT35R's available! (PhoenixTurbo.com)
What's the hp rating on the gt35r? How is the gt35r compared to the gt3040r? I'm looking at both as a possiblity?
Do you think there to big for b16a2 (84mm)??? I want to put down around over 500hp, and eventually near 600.
Currently at 445hp @ 22.7 psi with t3/t67 stg. 3 wheel .63 A/R. It wouldn't make any more power.
Do you think there to big for b16a2 (84mm)??? I want to put down around over 500hp, and eventually near 600.
Currently at 445hp @ 22.7 psi with t3/t67 stg. 3 wheel .63 A/R. It wouldn't make any more power.
Thread Starter
B*A*N*N*E*D
Joined: Sep 2002
Posts: 2,661
Likes: 0
Re: GT35R's available! (TurboChrgd_Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboChrgd_Civic »</TD></TR><TR><TD CLASS="quote">What's the hp rating on the gt35r? How is the gt35r compared to the gt3040r? I'm looking at both as a possiblity?
Do you think there to big for b16a2 (84mm)??? I want to put down around over 500hp, and eventually near 600.
Currently at 445hp @ 22.7 psi with t3/t67 stg. 3 wheel .63 A/R. It wouldn't make any more power.</TD></TR></TABLE>
the GT35R is supportable of ~600whp.
the GT3040R uses the same compressor section, but the smaller gt30 turbine wheel, so flow is limited to ~525whp.
as for not being able to make over 445hp with the T3/TO4R, what are the dimensions of your current intercooler?
pm sent
Do you think there to big for b16a2 (84mm)??? I want to put down around over 500hp, and eventually near 600.
Currently at 445hp @ 22.7 psi with t3/t67 stg. 3 wheel .63 A/R. It wouldn't make any more power.</TD></TR></TABLE>
the GT35R is supportable of ~600whp.
the GT3040R uses the same compressor section, but the smaller gt30 turbine wheel, so flow is limited to ~525whp.
as for not being able to make over 445hp with the T3/TO4R, what are the dimensions of your current intercooler?
pm sent
Honda-Tech Member
Joined: Sep 2002
Posts: 4,414
Likes: 0
From: Bay Area, CA, US
Re: GT35R's available! (PhoenixTurbo.com)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PhoenixTurbo.com »</TD></TR><TR><TD CLASS="quote">
the GT35R is supportable of ~600whp.
the GT3040R uses the same compressor section, but the smaller gt30 turbine wheel, so flow is limited to ~525whp.
as for not being able to make over 445hp with the T3/TO4R, what are the dimensions of your current intercooler?
pm sent</TD></TR></TABLE>
Replied!
PWR intercooler 24x8x3 (Should support about 550+)
In your opinion how much hp should my current turbo be good for?
the GT35R is supportable of ~600whp.
the GT3040R uses the same compressor section, but the smaller gt30 turbine wheel, so flow is limited to ~525whp.
as for not being able to make over 445hp with the T3/TO4R, what are the dimensions of your current intercooler?
pm sent</TD></TR></TABLE>
Replied!
PWR intercooler 24x8x3 (Should support about 550+)
In your opinion how much hp should my current turbo be good for?
Trending Topics
Joined: Sep 2004
Posts: 601
Likes: 0
Re: GT35R's available! (TurboChrgd_Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboChrgd_Civic »</TD></TR><TR><TD CLASS="quote">
Replied!
PWR intercooler 24x8x3 (Should support about 550+)
In your opinion how much hp should my current turbo be good for?</TD></TR></TABLE>
Over 600 to the wheels without a problem.
Replied!
PWR intercooler 24x8x3 (Should support about 550+)
In your opinion how much hp should my current turbo be good for?</TD></TR></TABLE>
Over 600 to the wheels without a problem.
Thread Starter
B*A*N*N*E*D
Joined: Sep 2002
Posts: 2,661
Likes: 0
Re: GT35R's available! (TurboChrgd_Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboChrgd_Civic »</TD></TR><TR><TD CLASS="quote">Do the GT35R's come in 5-bolt?</TD></TR></TABLE>
we only offer the GT35R in the T3 flanged GT turbine housing with a 3" conical diffuser discharge.
heres a couple photos:
let us know if you have any other questions 1-877-23-turbo
we only offer the GT35R in the T3 flanged GT turbine housing with a 3" conical diffuser discharge.
heres a couple photos:
let us know if you have any other questions 1-877-23-turbo
Thread
Thread Starter
Forum
Replies
Last Post
warwagon
Forced Induction
13
Mar 13, 2004 10:34 AM