i have my bumper off, cuz i removed the headlights, and im going through a HID retrofit.

i saw these too brackets.. lol, they actually look like beer holders or something.. anyone have a clue what they're for?

 

Yeah those are JDM sake holders when working on the front end.

 

lmao to the guy that said sake holders.....those brackets are where your corner lights go into.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by myDC4rox &raquo;</TD></TR><TR><TD CLASS="quote">lmao to the guy that said sake holders.....those brackets are where your corner lights go into.</TD></TR></TABLE>

 

what are u planning to use to retrofit? Make sure you take pics for a DIY than email me it so i can see how

 

those are there so that your corner lenses dont fall out. u know how to take your corner lense off , and put them on right?

 

yup, like every one says. they are for the corner lights. one side of the light slides into the round peaces and the other side is held down with a screw.

 

sadly enough, I trimmed mine a little to shave some weight off lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tweakmeister &raquo;</TD></TR><TR><TD CLASS="quote">sadly enough, I trimmed mine a little to shave some weight off lol</TD></TR></TABLE>

:::homervoice::: DOH!

 

oh ok.. lol, i looked at it, and put the corner lights in, after i wet sanded and polished em up, and yeah, the one end goes in it.. lol

it threw me off, cuz my CRX doens't have anything like that, the tab on that is molded into the bumper.. those loops threw me off.

and yes, im using Audi A4 projecotors and im putting them in my Integra housings. its almost done.

 

those are cup holders for when you are working on your front end....

 

don't take those off, they hold ur corners lights in

 

no, all of you are wrong, those bracket thingys are for holding my beer while i have the front bumper off, putting a turbo on it. DUH!!

 

I thought they make the car go faster.

 

Oddly enough, my car dont have those. Where can I get them (the corners fall in alot)

 

Ever noticed how it looks a little bit like a BMW when the front bumper cover is off..... I didn't know those held the front lights in. Time to fix those things from falling our again. D@mn POS.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95TEG &raquo;</TD></TR><TR><TD CLASS="quote">Oddly enough, my car dont have those. Where can I get them (the corners fall in alot)</TD></TR></TABLE>

hehe....i have a confession, i don't have those either. My corners are held in by taping it in place from the inside.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by myDC4rox &raquo;</TD></TR><TR><TD CLASS="quote">lmao to the guy that said sake holders.....those brackets are where your corner lights go into.</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by calxtreme &raquo;</TD></TR><TR><TD CLASS="quote">I thought they make the car go faster.</TD></TR></TABLE>

hahahahahahahahahahaha

 

it also help when you hit somethin your corner light doesnt break it just moves back

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Built B16A &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>

japanese engineering and design at its best.

too bad the bumper lights still wobble around like something is loose..

 

atlest take a pic with a beer in each one for good measure

 

while we're on the subject of integra bumpers..

i know this is common for 94-97 front-end owners..

on my 94 integra, this middle urethane 'flap' (see pic below) is hanging down and it looks HORRIBLE. im sure the fasteners have been destroyed through normal wear and tear.

i'm thinking of just DREMELing this flap OFF. anyone know if this is a bad idea? i assume its to protect the underbody, but is this flap really necessary?

 

When secured, this piece aids in the stability of the lower portion of the front bumper.

 

hey, don't get smart with me

i realize that the flap helps the bumper stay on more securely (and offers some sort of protection to the front of the underbody), but mine just hangs and the fasteners/screws are long gone.

i think i'll just snip it off since its not really serving its purpose at the moment.