i put a sohc in my hatch while my motor is being built and now my car pulls to the left hard it didnt do it before i have some cheap coilovers that came with the car but other than that i cant figure out the prob...

i also have bad camber on the back wheels but car is at stock height and when i turn the car fells like it sways it has gsr sway bars front and back was woundering if that has anything to do with it

 

alignment?

 

fix your alignment.

 

It is probably your alignment, if that is not the solution check to see if you have a siezed brake caliper.

 

After i got new tires and an alignment, i had serious torque steer under acceleration.

Turned out being a worn front lower control arm bushing

 

i have never had to get alignment after doing a swap but i was consigering that ...
i thought it woul be the tires too since i put some new rims on when i did the swap
but i rotated them still no help no seezed caliper it stops on a dime..thanks for all comments....ima put on my traction bars see if does aynthing

 

well what u know...the traction bars helpedout alot steering barely pulls to the left now and car feels much stiffer jimfab

 

also make sure the psi matches up left and right