GREDDY E-MANAGE ECU ENGINE FUEL CONTROL UNIT
Hey, I have a ZC powered crx and i'm going turbo very soon so I was wondering if anyone knows how well the GREDDY E-MANAGE ECU ENGINE FUEL CONTROL UNIT will work with my setup? if anyone is using this setup also, let me know. thanks
josh
josh
There are tons of threads on the E-manage, search.
In order to make it worth your while you would need to purchase the injector and ignition harness, and if you plan on running over 11 pounds, then you will need their 3 bar sensor also, in which case the entire system is more than Hondata, which will blow the E-manage out of the water.
What are your power goals?
The cheapest route I would take would be an FMU and fuel pump setup. Then you could step up to Turboedit with DSM 450's and a fuel pump, then finally there is Hondata, which you will also need injectors and a fuel pump for.
In order to make it worth your while you would need to purchase the injector and ignition harness, and if you plan on running over 11 pounds, then you will need their 3 bar sensor also, in which case the entire system is more than Hondata, which will blow the E-manage out of the water.
What are your power goals?
The cheapest route I would take would be an FMU and fuel pump setup. Then you could step up to Turboedit with DSM 450's and a fuel pump, then finally there is Hondata, which you will also need injectors and a fuel pump for.
Thread
Thread Starter
Forum
Replies
Last Post
MugenFlaredCRX
Honda CRX / EF Civic (1988 - 1991)
1
Jan 5, 2005 11:00 PM




