hey i have a 3rd gen DC integra. I am going to have a 4-channel amp in my trunk that is going to be used as a 2-channel to power a set of compnoents in the front. where should i run the speaker wire? through the side under the foot rail thing (foot of the door)? or is there a way to run it through the chassis like factory or something??

 

run it to the stock factory wire on the harness. from harness, under middle console, under carpet, to amp. for rears u can just wire it straight to the rear

 

do you basically mean, to have it run from the amp to the factory radio wire harness and from the factory radio harness to the front speakers? if so, what if i want to use my stinger speaker wires fropm the amp all the way to the components? cuz wouldn't that be better than having stinger wires from amp to factory radio harness wires to speakers?

 

would be better, was too much trouble for me to run wires to the doors. tapping it to the wire on stock harness should be fine, saves time

 

Unless you are running a massive amount of power through the tire, I would just run it to the harness.