Sorry for caps but i have to go to work in about 2 hours and i'm mounting my intercooler and the stock bumper holes you know the plastic one's how you have to cut them out. Well what should i do to get those out before i tear into the holes.?

 

Do you mean the license plate hole caps? If you are hacking you bumper then who cares how they come out, just strat ripping it apart. But you should just be able to pop them out.

 

no the plastic gril and the two side holes around it on a stock 92-95 civic ex

EDIT: would a Hack saw be ok?

 

WHAT THE ****!!!! rules are rules for a reason. (the Mods Will Be Pissed)
but ya i would assume that the hacksaw would work.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Campana13 &raquo;</TD></TR><TR><TD CLASS="quote">WHAT THE ****!!!! rules are rules for a reason. (the Mods Will Be Pissed)
but ya i would assume that the hacksaw would work.</TD></TR></TABLE>
what are you talking about?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civproject14 &raquo;</TD></TR><TR><TD CLASS="quote">no the plastic gril and the two side holes around it on a stock 92-95 civic ex

EDIT: would a Hack saw be ok?</TD></TR></TABLE>
Yea i used a butter knife on the foglight holes. And a dremal on the center. Its not hard, but yea a hacksaw will work

 

dremel

 

i used a cut off wheel and a steak knife.

 

i used an utility knife took some time but came out nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohcvtec1995 &raquo;</TD></TR><TR><TD CLASS="quote">what are you talking about?</TD></TR></TABLE>
umm the rules.......

2.B. Please do not make thread titles in all caps or with symbols that will attract attention. This steers users away from the other (most likely more important) threads on the page.

 

but this is something that he needed fixed in a hurry bc he was on his way to work.... stop being a troll

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Campana13 &raquo;</TD></TR><TR><TD CLASS="quote">
umm the rules.......

2.B. Please do not make thread titles in all caps or with symbols that will attract attention. This steers users away from the other (most likely more important) threads on the page.

</TD></TR></TABLE>
Well obiviously there was not a problem or it would have been locked. And he clearly apoligized for the caps being on at the beginning of his thread. And everyone helped him out and did not flame on him for it so get a life, and stop trying to be cool.

 

no he has 100 posts now he's cool...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Soccerking3000 &raquo;</TD></TR><TR><TD CLASS="quote">no he has 100 posts now he's cool...</TD></TR></TABLE>
If you read his sig you can see why it got there.

 

ya exactly

 

Well guys I appreciate you. For not flaming me and also giving me some advice I did end up using a utility knife and it did come out fine. By the way sorry MOD'S I didn't mean to be a *** bucket or anything. Dude for bitching man just wait tell you need an important question in a hurry and everyone bitches at you instead of helping you. Help people not be a *** stick tattle tail mommas boy.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civproject14 &raquo;</TD></TR><TR><TD CLASS="quote">Well guys I appreciate you. For not flaming me and also giving me some advice I did end up using a utility knife and it did come out fine. By the way sorry MOD'S I didn't mean to be a *** bucket or anything. Dude for bitching man just wait tell you need an important question in a hurry and everyone bitches at you instead of helping you. Help people not be a *** stick tattle tail mommas boy.</TD></TR></TABLE>

well dont stoop to his level...

 

Sorry. Just rough night at work Telemarketing blows.

 

Dremal, if you dont have one i would invest in one you will use it over and over

 

...how did it all turn out?


Modified by slowdx9585 at 1:19 AM 12/10/2004

 

Yes. Getting one for Christmas

 

Yes It did thanks again guys well actully sorta I got the two side whole's out but the middle i didn't take out i cut some out of it to make it fit around i want the sleeper look so is there any suggestions on covering the 2 little whole or i might just spraypaint my 180 mandrel bends and my couplers right there but not sure anny suggestions while where on the subject?

 

you should be the one talking...every thread i enter i see you bitching at somebody. Cut the **** and go back to making stupid *** post on :

1. https://honda-tech.com/zerothread?id=1080390 (front end converstions)
2. https://honda-tech.com/zerothread?id=800527 (your sweet headlights, taillights, fenders, wheels )
3. https://honda-tech.com/zerothread?id=752997 (washing your car in 8 degree weather...who the **** cares!)
4. https://honda-tech.com/zerothread?id=689034 (?????)
5. https://honda-tech.com/zerothread?id=659961 (how to post pics )
6. https://honda-tech.com/zerothread?id=657611 (dohc head on a sohc...wtf are you thinking?)

who should be the one getting flammed? at least this post was legit

glad everything worked out.. pics would make this a lot easier though

 

yeah, pretty sure jon sent you home with a sore butt after that *** reaming.

 

aaahhhhhhhhhhh hahahahahahahahahah best thing i have seen in a while