Replacing ignition lock
Thread Starter
Joined: Jul 2004
Posts: 36
Likes: 0
From: bronx, ny
Replacing ignition lock
A couple months ago my accord got stolen, i got it back 2 days later. Now i never got around to it, and now im gonna have to get this fixed.
The whole ignition lock cylinder is just broken out. I can use my key to catch where the lock would go i guess. So now i got a used ignition with lock key and wires. But heres my other problem. One day i went to start my car with a screwdriver, and touched the circuit board thats in the steering colum and caused a spark. Since then my shifter locks and i gotta use the shiftlock release. Also my horn doesn't work, and neither does cruise control.
The circuit board was cracked when i got it back from the towing company, but my horn still worked, and i didn't have to use the shiftlock. I dont know about cruise control.
So i would like to know what that board is called, and if that would most likely be the problem, or /and if its the fuses.
Thanks alot
The whole ignition lock cylinder is just broken out. I can use my key to catch where the lock would go i guess. So now i got a used ignition with lock key and wires. But heres my other problem. One day i went to start my car with a screwdriver, and touched the circuit board thats in the steering colum and caused a spark. Since then my shifter locks and i gotta use the shiftlock release. Also my horn doesn't work, and neither does cruise control.
The circuit board was cracked when i got it back from the towing company, but my horn still worked, and i didn't have to use the shiftlock. I dont know about cruise control.
So i would like to know what that board is called, and if that would most likely be the problem, or /and if its the fuses.
Thanks alot
Thread
Thread Starter
Forum
Replies
Last Post
NiBlazed
Honda Accord (1990 - 2002)
7
Sep 28, 2004 08:47 PM