Hey before i had some 7.33mm and my car ran good. now i went and got some 9.33mm thinking i'll get more spark.
but here is my problem, my car now runs a lil slower. could it be the spark is too much, and should i turn up my fpr to about 45 psi.

if not which wire size will be good for my car.

thanks

 

I'm boosted and use good ole NGK blue wires, never had any probs.

 

ngk wires. if you get lower quality wires they have a higher resistance. it will lower the voltage the plug gets.

 

Go to the dealer and get new OEM wires. You can run 300hp on a stock ignition system.

 

get stock oem ones... unless u have lots done to ur motor

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsr_to_the_MAX &raquo;</TD></TR><TR><TD CLASS="quote">get stock oem ones... unless u have lots done to ur motor</TD></TR></TABLE>

and for look NGK..
dont have a money? then there is always APC holding ur back..lmao

 

oem or ngk are the best your ever going to get for your teg ... dont waste your money on all those bling wires...

 

&lt;&lt;&lt;&lt;&lt;&lt;--Running NOLOGYs on stock motor.

 

For 65 dollars you can get a set of MSD's that are better than stock. But Nology's are a little better for twice the price.

 

NGK Blues...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NUBREED &raquo;</TD></TR><TR><TD CLASS="quote">NGK Blues... </TD></TR></TABLE>