hp #'s using a t3 60-1?
Thread Starter
Joined: Jul 2004
Posts: 21
Likes: 0
From: Jerz, NJ
hp #'s using a t3 60-1?
just curious on what type of hp numbers is anyone getting out of there t3 60-1
anyone have any experience with them.just purchase mine .63turbine .70 comp
goal is to reach 4-425 hp
anyone have any experience with them.just purchase mine .63turbine .70 comp
goal is to reach 4-425 hp
Joined: Oct 2004
Posts: 959
Likes: 0
From: work
Re: hp #'s using a t3 60-1? (tyrone27)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tyrone27 »</TD></TR><TR><TD CLASS="quote">at what boost level?</TD></TR></TABLE>
Mid 20's. The 60-1 wheel is most efficient at quite low boost pressures (see url=http://www.turbocalculator.com/compressor-maps/t04-60-1.jpg]here[/url]) compared to most turbos. That peaks out at a 2.00 pressure ratio, go look at a T66's map and it's peak efficiency island runs up to a 3.4 pressure ratio, or around 35 pounds of boost! 425 WHP should be achieved at under 20 pounds of boost, i'd guess around 17 or 18.
Mid 20's. The 60-1 wheel is most efficient at quite low boost pressures (see url=http://www.turbocalculator.com/compressor-maps/t04-60-1.jpg]here[/url]) compared to most turbos. That peaks out at a 2.00 pressure ratio, go look at a T66's map and it's peak efficiency island runs up to a 3.4 pressure ratio, or around 35 pounds of boost! 425 WHP should be achieved at under 20 pounds of boost, i'd guess around 17 or 18.
Thread
Thread Starter
Forum
Replies
Last Post
RedTT
Forced Induction
89
Mar 27, 2007 01:52 PM
