just wondering, im going to be buying the ls race cams and was wondering what you guys think of them? thanks

 

Well, I can tell you that they are regrinds and not new cams.

 

i know...

 

theres plenty of HT guys running our cams. Unfortunately, most of them arent outspoken as most of us and they dont post much. the only one I know of on the top of my head that I see posting often is sCeRaXn
he's using one of our LS cams

 

well when i had my ls i ran some pretty aggressive cams that exospeed sells. they are regrinds but it didn't matter, it all depends on your set up and what you are looking for. i was very happy with mine. i never had the chance to tune or dyno the cams i had but i think they were the highest or second highest ones that will advertises on his site not sure. my set up was this: chipped ecu ericks, header dc's, cams exospeed, short ram, 2.5 pipping to a n1. now this set up was able to run side by side with a h22 prelude with basic bolt ons.

 

my setup will be
b18b bottom end
ctr pistons and ls rods
pnp b18b head, 3 angle valve job etc
exospeed race cams
exospeed valvetrain
skunk 2 IM
bisi style header
generic intake
possibly a wet 50-80 shot

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by exospeedAMcrx &raquo;</TD></TR><TR><TD CLASS="quote">theres plenty of HT guys running our cams. Unfortunately, most of them arent outspoken as most of us and they dont post much. the only one I know of on the top of my head that I see posting often is sCeRaXn
he's using one of our LS cams</TD></TR></TABLE>


Do me a favor and post the specs of your cam grinds in this thread so that they can be put on the allmotorhonda.com website! Thanx!

https://honda-tech.com/zerothread?id=1050835

Your cooperation will be appreciated!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wpgcivic &raquo;</TD></TR><TR><TD CLASS="quote">my setup will be
b18b bottom end
ctr pistons and ls rods
pnp b18b head, 3 angle valve job etc
exospeed race cams
exospeed valvetrain
skunk 2 IM
bisi style header
generic intake
possibly a wet 50-80 shot</TD></TR></TABLE>


Be careful running N2O on that high of compression!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybrid_vtec &raquo;</TD></TR><TR><TD CLASS="quote">


Do me a favor and post the specs of your cam grinds in this thread so that they can be put on the allmotorhonda.com website! Thanx!

https://honda-tech.com/zerothread?id=1050835

Your cooperation will be appreciated!</TD></TR></TABLE>

Nevermind I just read my other post! Thanx!

 

What up man,


Holla at me about ur CRXs. Im interested in your set up and any times you've ran so far. Also if your tryin to "ref" your swaps. Let me know. Peace.

 

bump