I searched and did not find much on what roll cages people are running in there ITR's and looked around and have not found that much for options i am probable not looking in the right places so any help would be great THANKS

 

I am not running one... but 'auto power' has a bolt in cage that seems to work fine.

 

auto power

 

Thank you did you get it strait from auto power?? Do they have a web page?

 

http://www.ioportracing.com

I found mine used - Dan GSR =

 

anyone got a site of how to install the roll cage?

 

roll cage IS NOT the same as a roll BAR as pictured in RJ.'s pictures.

 

This may be a stupid question, but I've looked around, and no one has really asked this question.

Are the rear seats useable? I don't see how you can get into them, let alone sit in them.

djSALIX <--- Who will be purchasing a Black ITR as soon as his EK is sold

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by djSALIX &raquo;</TD></TR><TR><TD CLASS="quote">This may be a stupid question, but I've looked around, and no one has really asked this question.

Are the rear seats useable? I don't see how you can get into them, let alone sit in them.

djSALIX &lt;--- Who will be purchasing a Black ITR as soon as his EK is sold </TD></TR></TABLE>

They are "usable"... but it would be extremely unsafe and idiotic to put anything still breathing back there.

 

Sorry yes i was looking more for a roll bar than a weld in cage but the auto power looks like a good roll bar and is not that bad priced thank you for all the info

 

Joestypes- HT user makes nice roll bars i have one. but i don't own an ITR. He does make them for the integra

 

autopower or get one made my joestypes.

 

btw, here's a link to joestypes' rollbar.
https://honda-tech.com/zerothread?id=879799

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .RJ &raquo;</TD></TR><TR><TD CLASS="quote">
I found mine used - Dan GSR = </TD></TR></TABLE>

 

Kirk racing

 

.RJ, your roll bar set-up looks amazing. Leaving the interior panels and rear seats in make it look so clean. AWESOME!!!!! I think I'm going to look into getting one after seeing your pics.

 

Dan GSR, did you get rid of the front part of the autopower rollcage because it appears that .RJ only installed the rollbar?

 

two different cars/ cage/ rollbars.

 

wow... someone is goin all out

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by white rocket &raquo;</TD></TR><TR><TD CLASS="quote">.RJ, your roll bar set-up looks amazing. Leaving the interior panels and rear seats in make it look so clean. AWESOME!!!!! I think I'm going to look into getting one after seeing your pics. </TD></TR></TABLE>

I guess I should have had mine chromed for extra NOPI points

Your motivation for getting one should not be because it "looks good". I dont drive my car much on the street.

 

RJs ride is

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by djSALIX &raquo;</TD></TR><TR><TD CLASS="quote">This may be a stupid question, but I've looked around, and no one has really asked this question.

Are the rear seats useable? I don't see how you can get into them, let alone sit in them.</TD></TR></TABLE>

The kind of Autopower setup that RJ and I have alows you to unbolt the harness bar and cross brace. After they are removed, with only the hoop still in place, you should be able to put material in the rear seats.

I would not condemn a human being to that space, but you should be able to get even fairly large parcels into the rear seat area.

Like many ITR owners, I was concerned with preserving the OEM appearance of the car after the Autopower installation.

However, also like most ITR owners, I sooner or later discovered that the rear hatch cover and seats might as well come out of the car.

 

My harness bar and cross brace are welded in - I prefer it that way, it is required for SCCA Solo 1 (time trials).

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nightrider &raquo;</TD></TR><TR><TD CLASS="quote">btw, here's a link to joestypes' rollbar.
https://honda-tech.com/zerothread?id=879799</TD></TR></TABLE>


Beautiful welds !!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jspectyper &raquo;</TD></TR><TR><TD CLASS="quote">Kirk racing </TD></TR></TABLE>

Where'd you get that from?