Did this today:

1 3/4 DOM 1020 Alloy TrueRace Engineering 4pt "All Purpose" Bolt in Cage Gonna do another w/ crossing rear supports in a couple weeks...Also gonna send this out to get powdercoated when the header gets fab'd up for the K20A...I think the welds look pretty good



















$420 Bolt in or Weld in, off set harness bar avail for tall people

 

That's a really nice job (beautiful actually), and sounds like a great price as well.
Do you know what it weighs?

Also, how much would it be after powdercoating?
Ed

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zygspeed &raquo;</TD></TR><TR><TD CLASS="quote">That's a really nice job, sounds like a great price for the setup as well.
Do you know what it weighs?

Also, how much would it be after powdercoating?
Ed</TD></TR></TABLE>

weighs ~40lbs, would be lighter if made out of chromoly..powdercoating will be an extra $15-20, if you mean weight wise, I couldn't tell you; but I'll make sure to weigh it when it gets done.

 

Looks awesome.

 

I like! But I already have an Autopower.

 

 

sorry but thats a rollbar not a cage man

 

where might one pick one up?

 

I must say that very nice.. The welds look really good to..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Type R 98-870 &raquo;</TD></TR><TR><TD CLASS="quote">sorry but thats a rollbar not a cage man</TD></TR></TABLE>

hence the QUOTES I'm WELL aware it's not a cage, but 90% of people out there call them cages, so for searchability i used cage...

Hybrid Racer. - IM me

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChadB &raquo;</TD></TR><TR><TD CLASS="quote">I must say that very nice.. The welds look really good to..</TD></TR></TABLE>

Thank you, we pride ourselves on having some of the best welds in the industry...you should see the oil pan/block repair and aluminum welding work done at the shop

 

Just bookmarking this so I can send it to a friend later. Work looks good dude, nice job Out of curiousity, is there any particular reason for the bolts being offset on the rear arms?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JoesTypeS &raquo;</TD></TR><TR><TD CLASS="quote">Hybrid Racer. - IM me
</TD></TR></TABLE>

word.. check back

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sscguy &raquo;</TD></TR><TR><TD CLASS="quote">Just bookmarking this so I can send it to a friend later. Work looks good dude, nice job Out of curiousity, is there any particular reason for the bolts being offset on the rear arms?</TD></TR></TABLE>

Makes it a little easier and evens out the stress a bit

 

 

damn those welds look gooood

 

Those welds look great. Pretty clean, wish someone could teach me that!

 

craftsmanship looks superb, great attention to detail. whats the turnaround time after an order? i'm curious to see pics of a full 6 point rollcage now

 

What type of welder was used?

Those welds look PRIME.

 

Awesome quality!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lucky-R &raquo;</TD></TR><TR><TD CLASS="quote">craftsmanship looks superb, great attention to detail. whats the turnaround time after an order? i'm curious to see pics of a full 6 point rollcage now </TD></TR></TABLE>

Depending where you live, you'd have it within a week, possibly a little longer if you choose to get it powdercoated...I think we're just gonna offer basic black/white powder coating...but for a little extra we might offer paint-"matched" colors

 

Nice rollbar! Question: Since I have a RHD integra, would you be able to fabricate one where the crossbar is angled from the right to left?

Regards,

-Brandon

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 110 South &raquo;</TD></TR><TR><TD CLASS="quote">Nice rollbar! Question: Since I have a RHD integra, would you be able to fabricate one where the crossbar is angled from the right to left?

Regards,

-Brandon</TD></TR></TABLE>

yes, it's not a problem, nor would it be an additional cost, let me know

 

the welds do really look good. for quality.

 

What type of welder was used?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ThrillSeekers &raquo;</TD></TR><TR><TD CLASS="quote">What type of welder was used?</TD></TR></TABLE>

Miller Syncrowave 300