i saw this in this in this thread https://honda-tech.com/zerothread?id=124275

You peeps need to calm down just a tad there... This thread has nothing to do with my motor. The only reason why the pictures are even posted was becuz someone was flaming the motor for its inability to perform to its respective counterpart the almighty h23. The motor has the exact same characteristics as the h23, but with its extra .1 liter displacement.
Other than that, you guys want to know whats up with my motor. Well this is my setup in this motor:

JDM f22b DOHC NON vtec motor
95 Turbo Eclipse Pistons
Eclipse t25 Turbo Upgraded to a 16G
Custom Mounted Eclipse Turbo Manifold

Well ....

if you want to see pics of that moter click the link,
but my question is whats up w/ the dsm pistons?
any info about putting dsm pistons in an f22 will be appreciated

 

well they are the same bore, I don't know why you'd go to all that work I'm sure the F22B pistons are fine

 

not for boost there not

 

can you elaborate more, this seems interesting

 

anybody?

 

i'm thinking eclipse pistons may be the way to get good cheap forced induction pistons for f 22s, i just want to know more

 

i think that if you went through the trouble of building the block and putting in new pistons, you might as well spend the 400 for some je 9:1's or something like that. i don't think you could put those pistons in that motor anyway without sleeving it.......right?

 

f series is a cast iron sleeve with out that coating crap on the cylinder walls