d-series bored sleeves question?
Thread Starter
Junior Member
Joined: Jun 2004
Posts: 58
Likes: 0
From: WA
d-series bored sleeves question?
Is it possible to bore a d16z6 to a 1.8 liter?
Lets say that I got the block resleeved with iron ductile sleeves and get it bored to 80mm or 81mm....
Will this be possible and be a reliable street car?
I am thinking since you can bore a b16 to 85mm... Why can't you bore a z6 to 80mm or 81mm...
Lets say that I got the block resleeved with iron ductile sleeves and get it bored to 80mm or 81mm....
Will this be possible and be a reliable street car?
I am thinking since you can bore a b16 to 85mm... Why can't you bore a z6 to 80mm or 81mm...
Joined: Dec 2003
Posts: 327
Likes: 0
From: az, us
Re: d-series bored sleeves question? (93egSIboi)
Honda-Tech Member
Joined: Jan 2002
Posts: 15,334
Likes: 1
From: Raleigh, NC
Trending Topics
Thread Starter
Junior Member
Joined: Jun 2004
Posts: 58
Likes: 0
From: WA
Re: d-series bored sleeves question? (civiclizeEg)
thanks for the information guys.. my soon to be project..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hellshock2182 »</TD></TR><TR><TD CLASS="quote">good headgasket is needed and I wouldn't go any bigger than 79 though </TD></TR></TABLE>
Do you think 80 or 81mm is good for an all motor madness...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hellshock2182 »</TD></TR><TR><TD CLASS="quote">good headgasket is needed and I wouldn't go any bigger than 79 though </TD></TR></TABLE>
Do you think 80 or 81mm is good for an all motor madness...
Thread
Thread Starter
Forum
Replies
Last Post
delsol8017
Forced Induction
31
Nov 7, 2019 08:00 AM
gezer
Honda Civic / Del Sol (1992 - 2000)
1
May 8, 2003 08:20 PM
