I bought a hondata socketed ecu ready for tuning but I dont have the money right now for the s200+tuning plus new inj. so is there a way to make the ecu run the factory settings until I can afford the s200? somebody told me to cut the j1 jumper.
somebody chip in!!!!!!!!!

 

J1 is correct...or you could run a wire from j1 to a switch, then back to j1

 

ok lets say I cut j1 and the car wont even turn over with it. just fires over then dies. that jumper enables the ecu to read the chip right?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sleeping GIANT &raquo;</TD></TR><TR><TD CLASS="quote">that jumper enables the ecu to read the chip right?</TD></TR></TABLE>

Right

 

the jumper is cut and separated and it wont run the car. I just want to know why. it primes the fuel pump , and turns over but will not keep it running. damn

 

Unless Hondata taps into other areas of the ecu that I myself am not aware of.

 

thanx for the replies, Im not gonna quit, I wonder if I need to pull the burned chip out. frustrated.........