Where can I find information on Garrett turbo?
Ah yes, the turbo you listed is the T3/T04E 60 "trim" turbocharger using a stage III 2.559" T31 wheel diameter, and 76mm exducer & 58mm inducer compressor wheel.
The standard bearing system is a 270 degree thrust bearing system in a 2.5" 4 bolt .63A/R turbine housing. Capability is about 430whp give or take a few. maximum efficiency is at 22psi for a Honda engine. turbobygarrett will not list this part number.
The standard bearing system is a 270 degree thrust bearing system in a 2.5" 4 bolt .63A/R turbine housing. Capability is about 430whp give or take a few. maximum efficiency is at 22psi for a Honda engine. turbobygarrett will not list this part number.
Last edited by TheShodan; May 24, 2009 at 03:34 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
RyanAutry
Forced Induction
8
Jan 5, 2003 10:43 AM







