When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Help Getting Horn into Personal Wheel, and NRG Ground Question
Yes I've searched, yes I know there are a ton of topics on this but I haven't found anything that really focuses on this in particular or is clear about an answer.
Horn works if I connect the live wire and ground out the black wire on the upper metal frame of the horn. I can't figure out how to actually anchor the horn inside the hub/wheel though, and I don't even know if I need that metal ring or not.
I also don't know where I should actually have that black ground wire permanently, as it does need to have contact with something to remain grounded and actually work.
Re: Help Getting Horn into Personal Wheel, and NRG Ground Question
Don't know why you have two wires for the horn. I, too, have a Personal steering wheel but with a Luisi steering hub. As for that metal spacer in your hand...not sure what it's for.
Re: Help Getting Horn into Personal Wheel, and NRG Ground Question
That ring is inserted into the hub right where you see, then the horn is pressed into that sleeve. The ring is basically a shim you can use instead of using the horn cover that generally comes with NRG wheels. Seeing as you have a Personal wheel, you wont have the horn cover.
Re: Help Getting Horn into Personal Wheel, and NRG Ground Question
Originally Posted by Stillare
That ring is inserted into the hub right where you see, then the horn is pressed into that sleeve. The ring is basically a shim you can use instead of using the horn cover that generally comes with NRG wheels. Seeing as you have a Personal wheel, you wont have the horn cover.
Cool deal. So ring first, then shove the horn in. Going to be a really tight fit.
do you have a quick release?? do you know if the horn works? mine looks like yours as well but I cut a small wire and looped it thru the hole on the black ground wire then I wrapped around the metal bar thats on the back of the horn does that make sense?
this is what mine looks like dont mind the blue stuff
Last edited by akenwph; Jul 25, 2017 at 05:15 PM.
Reason: I added a picture
Re: Help Getting Horn into Personal Wheel, and NRG Ground Question
Originally Posted by akenwph
do you have a quick release?? do you know if the horn works? mine looks like yours as well but I cut a small wire and looped it thru the hole on the black ground wire then I wrapped around the metal bar thats on the back of the horn does that make sense?
this is what mine looks like dont mind the blue stuff
(picture)
I think I'm just going to try this the way you're doing it.
It'll be nice once I'm done on the interior of this car. Lots to do.