Blinking D4 Light & Check Engine Light? (97' civic, automatic tran.)
#1
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
97 civic, automatic transmission. Replaced the radiator yesterday, and some tranny fluid came out when doing so. So i added what i thought was lost and when i started it up and put it in reverse the check engine came on along with the "D4" light blinking. the car wont go now. When i accelerate the car doesnt respond like it should. I plugged an ob2 scanner in and "P0700 & P0758" came up. Please help. :'(
#2
Needs to be About 20% Cooler
iTrader: (1)
Join Date: Jun 2004
Location: San Bernardino, CA, USA
Posts: 1,878
Likes: 0
Received 1 Like
on
1 Post
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
did you unplug anything to get the radiator out? go and check everything is pluged in good, no grounds are disconnected and check all your fuses are good.
#3
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
Everything is plugged in correctly. Not sure about the fuses. Some tranny fluid was lost while replacing the radiator but i topped it off and checked the level and it was fine.
Thread
Thread Starter
Forum
Replies
Last Post
ice4me
Honda Accord (1990 - 2002)
9
11-30-2006 01:36 PM