WTT Only: my EK Comptech Tie bar for your EG Comptech Tie bar
#2
Honda-Tech Member
Join Date: May 2004
Location: CA, USA
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTT Only: my EK Comptech Tie bar for your EG Comptech Tie bar
Hi
I've got a silver Comptech rear sway bar mount, I Ibelieve it's for an EG.
The measurement between the center of bolt holes for the lower control arms is approximately 660mm, about 26".
If it's not too much trouble, can you measure the distance on your bar and let me know what it is.
I'm in the South Bay, off the 405.
I've got a silver Comptech rear sway bar mount, I Ibelieve it's for an EG.
The measurement between the center of bolt holes for the lower control arms is approximately 660mm, about 26".
If it's not too much trouble, can you measure the distance on your bar and let me know what it is.
I'm in the South Bay, off the 405.