WTB: Comptech/CT Engineering Intake EM1/Si/iIntegra (non GS-R)
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
WTB: Comptech/CT Engineering Intake EM1/Si/iIntegra (non GS-R)
Looking for the intake arm specifically but may be willing to take anything between that and an entire setup including the icebox. Let me see what you have!
#3
Honda-Tech Member
Thread Starter
iTrader: (1)
Re: WTB: Comptech/CT Engineering Intake EM1/Si/iIntegra (non GS-R)
Oh didn’t realize they picked the brand up. I will drop them a line if nothing pops up. Thanks for the tip.
#4
Re: WTB: Comptech/CT Engineering Intake EM1/Si/iIntegra (non GS-R)
I'm looking for the exact same thing. I also wasn't aware that heeltoeauto.com was selling the CT Engineering stuff now. I checked the website out and it seems they carry 4 versions of the "High Flow Cold Air Intake System". The website doesn't make that immediately clear so the part numbers are listed below for clarity:
320-010: 00-01 Integra GSR
320-011: 94-99 Integra GSR
320-012: 94-01 Integra LS, RS, GS
320-013: 97-01 Type R
Great find. Thanks! I thought posts like these were the only way to get this now.
320-010: 00-01 Integra GSR
320-011: 94-99 Integra GSR
320-012: 94-01 Integra LS, RS, GS
320-013: 97-01 Type R
Great find. Thanks! I thought posts like these were the only way to get this now.
Last edited by Mike457; 12-05-2018 at 02:09 AM.
#5
Honda-Tech Member
Thread Starter
iTrader: (1)
Re: WTB: Comptech/CT Engineering Intake EM1/Si/iIntegra (non GS-R)
I saw your post and thought it was quite a coincidence actually.
Also,
320-020: 99-00 Civic Si
Also,
320-020: 99-00 Civic Si
#10
Re: WTB: Comptech/CT Engineering Intake EM1/Si/iIntegra (non GS-R)
Sorry. I have Skunk 2 Intake Manifold (PN 307-05-0280). Chassis is 1994 Integra LS. Interestingly, I asked someone over at Heeltoeauto and he told me that he ran the 320-013 (Type R) kit in their B20 w/ P8R. He had an EJ2 though...
#12
Honda-Tech Member
Thread Starter
iTrader: (1)
Re: WTB: Comptech/CT Engineering Intake EM1/Si/iIntegra (non GS-R)
It fits with the Icebox, which I already own. I've been running a stock ITR inlet tube with it for many many years over two cars, but I need to install my 66mm throttle body and so that will not work anymore.
Thread
Thread Starter
Forum
Replies
Last Post
dave7
Southern California (Sales)
1
10-06-2018 01:44 AM