What do you think its worth?
#1
Thread Starter
Join Date: May 2002
Location: Wilkesbarre, pa, us
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
What do you think its worth?
Okay I am going to be selling my Integra soon and I wanted to get opinions on what I should be asking for it. The car is at Boosted Hybrids right now and will be tuned soon. He expects its capable of 500hp This car has all the best parts.
2001 Integra GSR
7,300 miles on car
Motor was pulled when the car had 6,000 miles and was built
Fully Built B18C1
GE 84.5mm sleeves
Wiseco Endyn Pistons
Eagle rods
Balanced and knife edged crank
ARP headbolts
GE overbored OEM Headgasket
Type-R oil pump
3 angle valve job (Endyn)
Port and polish (Endyn)
Ferrea stainless .5mm oversize valves
Ferrea valve springs and retainers
Stock GSR cams
Venom Cam gears
JG edelbrock Intake manifold
GE Fuel rail
780cc precision injectors
Walbro 255lph fuel pump
Aeromotive FPR
Braided AN fuel lines
Honda S100 with boost
Greddy Profec B Boost controller
Autometer Carbon fiber gauges (Boost, Oil, Temp, NOS, Voltage)
Spark Racing Turbo manifold (Braced)
Precision SC61 Turbo
Tial 35mm HP wastegate
Full 3" mandrel bent downpipe
3" Stainless flex pipe
Greddy Power Extreme II exhaust
Custom 2.5" mandrel bent intercooler piping
PWR intercooler
HKS SSQV BOV
ACT Prolite flywheel
Action 2KS clutch
JDM Type-R LSD
KYB AGX adjustable shocks
Sprint springs
APR Front Strut tower bar
SRR rear lower tie bar
Goodrich stainless brake lines
Cross drilled and slotted rotors all around
JDM Front end conversion
Phillips 6000k HID kit
VIS Carbon fiber hood
VIS Carbon fiber front lip
Optional OEM side skirts
Optional OEM Rear lips
Mugen replica rear wing
Racing Hart CP8-R wheels 12.5lbs each
Yokohama Parada Spec 2 Tires 205-40ZR17's (Only 300 miles on wheels and tires)
Pics can be seen here: http://www.cardomain.com/id/18gteg
2001 Integra GSR
7,300 miles on car
Motor was pulled when the car had 6,000 miles and was built
Fully Built B18C1
GE 84.5mm sleeves
Wiseco Endyn Pistons
Eagle rods
Balanced and knife edged crank
ARP headbolts
GE overbored OEM Headgasket
Type-R oil pump
3 angle valve job (Endyn)
Port and polish (Endyn)
Ferrea stainless .5mm oversize valves
Ferrea valve springs and retainers
Stock GSR cams
Venom Cam gears
JG edelbrock Intake manifold
GE Fuel rail
780cc precision injectors
Walbro 255lph fuel pump
Aeromotive FPR
Braided AN fuel lines
Honda S100 with boost
Greddy Profec B Boost controller
Autometer Carbon fiber gauges (Boost, Oil, Temp, NOS, Voltage)
Spark Racing Turbo manifold (Braced)
Precision SC61 Turbo
Tial 35mm HP wastegate
Full 3" mandrel bent downpipe
3" Stainless flex pipe
Greddy Power Extreme II exhaust
Custom 2.5" mandrel bent intercooler piping
PWR intercooler
HKS SSQV BOV
ACT Prolite flywheel
Action 2KS clutch
JDM Type-R LSD
KYB AGX adjustable shocks
Sprint springs
APR Front Strut tower bar
SRR rear lower tie bar
Goodrich stainless brake lines
Cross drilled and slotted rotors all around
JDM Front end conversion
Phillips 6000k HID kit
VIS Carbon fiber hood
VIS Carbon fiber front lip
Optional OEM side skirts
Optional OEM Rear lips
Mugen replica rear wing
Racing Hart CP8-R wheels 12.5lbs each
Yokohama Parada Spec 2 Tires 205-40ZR17's (Only 300 miles on wheels and tires)
Pics can be seen here: http://www.cardomain.com/id/18gteg
#2
Honda-Tech Member
Join Date: Jan 2003
Location: South of DC, VA, USA
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: What do you think its worth? (18gTeg)
it's worth whatever you'll take to get rid of it
if I had to venture a guess I'd say about 17,000 in the market
it is a beautiful car, I love how you did the gauges in the airbag spot
Nick
if I had to venture a guess I'd say about 17,000 in the market
it is a beautiful car, I love how you did the gauges in the airbag spot
Nick
#5
Honda-Tech Member
Join Date: Mar 2001
Location: Ft. Worth, TX
Posts: 3,650
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Kendall)
Hehe..I'll give you $60 then.
Unfortunately, you'll probably lose your *** on the parts and labor if you have to sell it.
Also, you might consider purchasing stock in a startup carbon fiber car parts manufacturer!
Unfortunately, you'll probably lose your *** on the parts and labor if you have to sell it.
Also, you might consider purchasing stock in a startup carbon fiber car parts manufacturer!
#6
Honda-Tech Member
Join Date: Jan 2004
Location: The Manor, NY
Posts: 5,400
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Kendall)
<--------seeing all the recent threads for "how much is my teg worth" in the integra technical forum..........he thinks to himself:
"I think someone found the loophole for selling their tegs on the teg technical forum instead of the vehicle classifieds forum"
"I think someone found the loophole for selling their tegs on the teg technical forum instead of the vehicle classifieds forum"
Thread
Thread Starter
Forum
Replies
Last Post
lanojp1
Vehicles for sale
1
08-11-2005 09:59 PM