OH FS: Built B20Vtec with ITR Trans...Trade 4 K swap
10-01-2009, 05:36 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: Amelia, ohio, usa
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
OH FS: Built B20Vtec with ITR Trans...Trade 4 K swap
2000 B20z2 CRV block, fully hot tanked, honed, decked
2000 GSR head, JDM spec, fully hot tanked, milled, and port matched to manifold
1998 Integra Type R transmission LSD, 0 grinds, shifts like butter.
Motor Work:
OEM Honda water pump
OEM Honda ITR oil pump
OEM Honda piston rings
OEM Honda valve cover gasket set
OEM Honda valve seals
OEM Honda cam oil seals
OEM Honda head gasket
OEM Honda radiator hoses, new
Civic Type R Intake Cam, and Skunk 2 Stage 1 Exhaust cam
Blox cam seal
STR cam gears
Toda Timing belt
ITR dual valve springs on each side
Eagle Rods with ARP rod bolts
84mm Integra Type R spec pistons from RS machines
ACL race rod and main bearings
Stock crank, fully micro-polished and balanced
ARP Headstuds
AEBS Intake Manifiold, Satin Finish
AEBS 65mm Throttle body, with all BRAND NEW sensors
Blox TPS sensor
Golden eagle conversion kit
Hondata Intake Manifold Gasket
450cc DSM blue top Injectors
ACT Stage 3 clutch
ACT Lightened flywheel
Driveshaft shop stage 2 axles
Stock ITR airbox, with new K&N filter
JDM ITR valve cover
JDM ITR header
Chipped CTR p30 ecu
3,xxx on FULLY rebuilt motor , was built about 2 months ago. ALL NEW OEM GASKETS!!!!
Just recently gave it a new Royal Purple Oil Change
Was tuned a couple months ago here in Cincinnati, at TPR ( www.tprcincy.com ) , by Dave Blundell. Car made 200whp and 156 ft/lbs.
All motor work was done professionaly by a race/machine shop. ALL PARTS ARE 2 MONTHS OLD OR LESS
Asking $3K for everything listed or trade for K swap...
You can either pm me, call or text me at 513-582-3897 my name is Wes
Heres a pic of it in my 00 SI before it was totaled by a biker...
crappy cell pics when i was putting it together...
2000 GSR head, JDM spec, fully hot tanked, milled, and port matched to manifold
1998 Integra Type R transmission LSD, 0 grinds, shifts like butter.
Motor Work:
OEM Honda water pump
OEM Honda ITR oil pump
OEM Honda piston rings
OEM Honda valve cover gasket set
OEM Honda valve seals
OEM Honda cam oil seals
OEM Honda head gasket
OEM Honda radiator hoses, new
Civic Type R Intake Cam, and Skunk 2 Stage 1 Exhaust cam
Blox cam seal
STR cam gears
Toda Timing belt
ITR dual valve springs on each side
Eagle Rods with ARP rod bolts
84mm Integra Type R spec pistons from RS machines
ACL race rod and main bearings
Stock crank, fully micro-polished and balanced
ARP Headstuds
AEBS Intake Manifiold, Satin Finish
AEBS 65mm Throttle body, with all BRAND NEW sensors
Blox TPS sensor
Golden eagle conversion kit
Hondata Intake Manifold Gasket
450cc DSM blue top Injectors
ACT Stage 3 clutch
ACT Lightened flywheel
Driveshaft shop stage 2 axles
Stock ITR airbox, with new K&N filter
JDM ITR valve cover
JDM ITR header
Chipped CTR p30 ecu
3,xxx on FULLY rebuilt motor , was built about 2 months ago. ALL NEW OEM GASKETS!!!!
Just recently gave it a new Royal Purple Oil Change
Was tuned a couple months ago here in Cincinnati, at TPR ( www.tprcincy.com ) , by Dave Blundell. Car made 200whp and 156 ft/lbs.
All motor work was done professionaly by a race/machine shop. ALL PARTS ARE 2 MONTHS OLD OR LESS
Asking $3K for everything listed or trade for K swap...
You can either pm me, call or text me at 513-582-3897 my name is Wes
Heres a pic of it in my 00 SI before it was totaled by a biker...
crappy cell pics when i was putting it together...
Last edited by k20dreamSI; 10-02-2009 at 06:22 AM. Reason: added more
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
watisjdm
For Sale
3
03-29-2012 09:19 AM
