NITROUS WORKS SKUNK2 BUDDY CLUB CTR
07-14-2007, 09:40 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2003
Location: smallbany, south GA, us
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
NITROUS WORKS SKUNK2 BUDDY CLUB CTR
BUYER PAYS SHIPPING AND 3% PAYPAL FEE IF USING PAYPAL
<U>IF YOU VIEW PLEASE BUMP THANKS</U>
please don't lowball me with stupid offers don't waste my time and i won't waste yours
first up is a full nitrous works direct port kit for four bangers. everything is brand new in the box and cost right around $700 for everything i have new and it comes with two five pound bottles for guys who want to hide them under the dash or somewhere else. i'm asking $550obo
second is a set of buddy club spec 5 cams used in my engine on the engine dyno only for about 20 pulls these cams were broken in correctly by my engine builder so the cams still look brand new. these cams have gobs of midrange power and kill most other sets of cams on the market, these are what 270 bhp on my engine was acheived with so these cams will make the power you need but aren't for the faint of heart and aren't just throw in cams. i payed $675 for these new when they first came out but i'm willing to take a loss and sell them for $450 OBO buyer pays shipping or $600 with old style skunk2 cam gears bronze in color.
third is a full polished stainless skunk2 megapower cat back for eg hatches the exhaust has a few scratches here and there and the two hangers on the muffler are broke but overall is in good shape it just shakes a little when driving. $175obo buyers pays shipping
fourth is a ctr n1 crank pulley never installed but taken out of the package i decided to go with a fluidampner instead $60
mazworx 6 point pre bent weld in cage kit in cromoly description from site
The IPG Parts Honda and Acura Uweld 6 Point roll bar kits are of exceptional quality and fitment. Don't waste your time and money with other kits, buy the best to begin with and save the headache. Our precision bent main hoops offer great fit the first time. All Uweld 6 point roll bar kits include the main hoop, (2) rear bars, (2) door bars, harness bar, and all 6x6 plates for installation. Cut to exact length all you need to do is notch the bars and weld into place. We can offer superior fitment versus other manufacturers due to our work on other customers vehicles. All measurements will be as if we are building a oneoff roll bar for your application.
i'm asking the same thing i paid because it's still in perfect condition you can get it without having to wait a couple weeks to have it made $499 buyers pays shipping and it's not bad i think it was somehwere around 50 bucks or so i can get pics if needed
arp rods bolts for gsr itr 9mm in size brand new in box $40
i have lots of crap laying around so if i might have something you needs just shoot me a pm and i'll check
<U>IF YOU VIEW PLEASE BUMP THANKS</U>
please don't lowball me with stupid offers don't waste my time and i won't waste yours
first up is a full nitrous works direct port kit for four bangers. everything is brand new in the box and cost right around $700 for everything i have new and it comes with two five pound bottles for guys who want to hide them under the dash or somewhere else. i'm asking $550obo
second is a set of buddy club spec 5 cams used in my engine on the engine dyno only for about 20 pulls these cams were broken in correctly by my engine builder so the cams still look brand new. these cams have gobs of midrange power and kill most other sets of cams on the market, these are what 270 bhp on my engine was acheived with so these cams will make the power you need but aren't for the faint of heart and aren't just throw in cams. i payed $675 for these new when they first came out but i'm willing to take a loss and sell them for $450 OBO buyer pays shipping or $600 with old style skunk2 cam gears bronze in color.
third is a full polished stainless skunk2 megapower cat back for eg hatches the exhaust has a few scratches here and there and the two hangers on the muffler are broke but overall is in good shape it just shakes a little when driving. $175obo buyers pays shipping
fourth is a ctr n1 crank pulley never installed but taken out of the package i decided to go with a fluidampner instead $60
mazworx 6 point pre bent weld in cage kit in cromoly description from site
The IPG Parts Honda and Acura Uweld 6 Point roll bar kits are of exceptional quality and fitment. Don't waste your time and money with other kits, buy the best to begin with and save the headache. Our precision bent main hoops offer great fit the first time. All Uweld 6 point roll bar kits include the main hoop, (2) rear bars, (2) door bars, harness bar, and all 6x6 plates for installation. Cut to exact length all you need to do is notch the bars and weld into place. We can offer superior fitment versus other manufacturers due to our work on other customers vehicles. All measurements will be as if we are building a oneoff roll bar for your application.
i'm asking the same thing i paid because it's still in perfect condition you can get it without having to wait a couple weeks to have it made $499 buyers pays shipping and it's not bad i think it was somehwere around 50 bucks or so i can get pics if needed
arp rods bolts for gsr itr 9mm in size brand new in box $40
i have lots of crap laying around so if i might have something you needs just shoot me a pm and i'll check
Trending Topics
07-31-2007, 04:57 PM
#16
Honda-Tech Member
Thread Starter
Join Date: Nov 2003
Location: smallbany, south GA, us
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Re: NITROUS WORKS SKUNK2 BUDDY CLUB CTR (ma_rio44)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ma_rio44 »</TD></TR><TR><TD CLASS="quote">ill give you 500 shipped including paypal fees. let me know thanks</TD></TR></TABLE>
500 shipped for what
500 shipped for what
Thread
Thread Starter
Forum
Replies
Last Post