"Getting out of the game" Fs. Spoon, Tein, ITR, UKDM and more...
#1
Honda-Tech Member
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: My PC
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
"Getting out of the game" Fs. Spoon, Tein, ITR, UKDM and more...
Ok, is time to move on to bigger things and sell everything that I own for my tegs.
All prices are firm and shipping is not included.
Any question & offers are welcome.
Everything is located in FL, I am willing to ship everything in here on buyers expenses.
1. UKDM Clusters x5
- I have 5 sets, mileage are: 114k, 127k, 130k, 156k for $300 & 61k for $325
2. UKDM Taillights
- Excellent condition no cracks $325
3. ARC Induction Box for DC2/EG
- Used but in excellent condition $325
4 ARC Intake Chamber for EG $250
- Will fit DC without ABS, One screw is missing but won’t affect anything. Both filters are included.
5 JRSC for a B16/b18c head $1250
- Everything you see is included. No belts.
6. Tein Type Flex for DC/EG $1100
-Basically new as you could see on the pics, used for less than 3k’s.
7. Spoon caliper with pad and Earl’s brake line. $1000
- Used for a small amount of time, really clean.
8. RC Machine PR-3 piston 81mm with Rings $165
- Everything is new.
9. JDM flare with bracket $30
10 UKDM/JDM fog switches x5 $35
11. Faze gauges, Air fuel ratio & Oil press psi both for $45
- Silver covers are included
12. MSD 6AL $85
13.JDM C/F switches $75
- USDM switch is installed already.
14. UKDM sonar signal lights $35
15. JDM Stanley signal lights $30
16. UKDM TYG signal lights $25
17. Super rare parking pole complete $250
- Switch, wire harness, antenna and relay included.
18. Super rare Halfmast antenna x2 $250 each
- Switch and relay included, this came out of a prelude but it will fit with dc2 brackets.
19. ARP Main Stud Kit #208-5403 GSR $75
- They are new, I open them thinking they were head studs. Nuts and washers never been open.
20. 98+ Mirrors $50
21. JDM folding mirrors 97-94 style $125
- relay and switch included.
22. AEM fuel rail and FPR $125
23. Function7 LCA for ITR $175
24. ACT 6 puck clutch $75
- minor rust but still new
25. ITR lower trunk bar $45
26. DC2 Skunk2 front strut bar $85
27. DC Old Skool front strut bar “new” $150
28. DC CS2 rear strut bar $100
29. ITR front strut bar $75
30. Benen front lower bar $50
Small rash on the bottom.
31. Head gasket part# 12251-p30-014 $40
32. P/S AEM True power pulley $25
33. UKDM signal lights $100
34. UKDM SIR fog light “Stanley” $225
35. 98+ ABS conversion kit $50
36. JDM courtesy lights “Rare” $125
- One small crack, nothing major
37. JDM Kenwood DPX-660MD MD/CD player $75
-No Harnees but Rc jacks included. Harness only cost $4.50 on ebay.
38. Eagle rods “New” B18c $315
39. Hondata P28 ECU with S300 & Innovate Wideband $895
Everything you see is included. OBD2B Harness
40. GSR Greddy Exhaust cat-back $200
41. OEM Axle ITR $75
-Good condition
42. ITR OEM intake $50
43. ITR 00 Engine Harness $125
44. LS full Swap 80k’s $ PM for info and price
45. ITR Radiator $50
- No leaks at all.
46. ITR headers $125
47. Make offers
48. GSR Block w/ ITR’s internals - $475 reduced
- Everything is include except for the oil catch and oil pan/baffle/crank pulley bolts
49. ITR head w/ Skunk2 stage 2 cams, Supertech valve kit, Skunk2 mani. - $1350 Reduced
Fuel rail, aem fpr or gauge is not included.
50. RHD clip. All you need for a RHD conversion. $850 Firm!!!
- Full UKDM RHD harness, from front to back. No cuts. Engine harness not included.
radio, cluster, steering wheel and climate control unit not included. You will also need throttle cable cause this one is damage.
All prices are firm and shipping is not included.
Any question & offers are welcome.
Everything is located in FL, I am willing to ship everything in here on buyers expenses.
1. UKDM Clusters x5
- I have 5 sets, mileage are: 114k, 127k, 130k, 156k for $300 & 61k for $325
2. UKDM Taillights
- Excellent condition no cracks $325
3. ARC Induction Box for DC2/EG
- Used but in excellent condition $325
4 ARC Intake Chamber for EG $250
- Will fit DC without ABS, One screw is missing but won’t affect anything. Both filters are included.
5 JRSC for a B16/b18c head $1250
- Everything you see is included. No belts.
6. Tein Type Flex for DC/EG $1100
-Basically new as you could see on the pics, used for less than 3k’s.
7. Spoon caliper with pad and Earl’s brake line. $1000
- Used for a small amount of time, really clean.
8. RC Machine PR-3 piston 81mm with Rings $165
- Everything is new.
9. JDM flare with bracket $30
10 UKDM/JDM fog switches x5 $35
11. Faze gauges, Air fuel ratio & Oil press psi both for $45
- Silver covers are included
12. MSD 6AL $85
13.JDM C/F switches $75
- USDM switch is installed already.
14. UKDM sonar signal lights $35
15. JDM Stanley signal lights $30
16. UKDM TYG signal lights $25
17. Super rare parking pole complete $250
- Switch, wire harness, antenna and relay included.
18. Super rare Halfmast antenna x2 $250 each
- Switch and relay included, this came out of a prelude but it will fit with dc2 brackets.
19. ARP Main Stud Kit #208-5403 GSR $75
- They are new, I open them thinking they were head studs. Nuts and washers never been open.
20. 98+ Mirrors $50
21. JDM folding mirrors 97-94 style $125
- relay and switch included.
22. AEM fuel rail and FPR $125
23. Function7 LCA for ITR $175
24. ACT 6 puck clutch $75
- minor rust but still new
25. ITR lower trunk bar $45
26. DC2 Skunk2 front strut bar $85
27. DC Old Skool front strut bar “new” $150
28. DC CS2 rear strut bar $100
29. ITR front strut bar $75
30. Benen front lower bar $50
Small rash on the bottom.
31. Head gasket part# 12251-p30-014 $40
32. P/S AEM True power pulley $25
33. UKDM signal lights $100
34. UKDM SIR fog light “Stanley” $225
35. 98+ ABS conversion kit $50
36. JDM courtesy lights “Rare” $125
- One small crack, nothing major
37. JDM Kenwood DPX-660MD MD/CD player $75
-No Harnees but Rc jacks included. Harness only cost $4.50 on ebay.
38. Eagle rods “New” B18c $315
39. Hondata P28 ECU with S300 & Innovate Wideband $895
Everything you see is included. OBD2B Harness
40. GSR Greddy Exhaust cat-back $200
41. OEM Axle ITR $75
-Good condition
42. ITR OEM intake $50
43. ITR 00 Engine Harness $125
44. LS full Swap 80k’s $ PM for info and price
45. ITR Radiator $50
- No leaks at all.
46. ITR headers $125
47. Make offers
48. GSR Block w/ ITR’s internals - $475 reduced
- Everything is include except for the oil catch and oil pan/baffle/crank pulley bolts
49. ITR head w/ Skunk2 stage 2 cams, Supertech valve kit, Skunk2 mani. - $1350 Reduced
Fuel rail, aem fpr or gauge is not included.
50. RHD clip. All you need for a RHD conversion. $850 Firm!!!
- Full UKDM RHD harness, from front to back. No cuts. Engine harness not included.
radio, cluster, steering wheel and climate control unit not included. You will also need throttle cable cause this one is damage.
Trending Topics
#9
Honda-Tech Member
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: My PC
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Re: "Getting out of the game" Fs. Spoon, Tein, ITR, UKDM and more...
pmed back
thanks
Thanks bro
Yes switch is included
Pmed back
#21
Junior Member
Join Date: Feb 2008
Location: Seattle, WA, US
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Re: "Getting out of the game" Fs. Spoon, Tein, ITR, UKDM and more...
I'm interested in the srs momo wheel. What condition is it in? Also, the red fuel rail and the function 7 LCA's. What condition are they in? Thanks.