FS/FT: SUPERTECH valvetrain, BUILT P&P B16 Head w/ ITR cams, Lenso Slicks & more!!!
11-29-2011, 09:08 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
FS/FT: SUPERTECH valvetrain, BUILT P&P B16 Head w/ ITR cams, Lenso Slicks & more!!!
Contact: PM
Shipping: Included with prices but add 3% Paypal
Located: Orlando, FL
92-95 RARE Optional Middle Console with Pioneer Double Din - $600
COMPLETE B18C1 Block, stock bore, balanced and micro polished crank, 9:1 Wiseco pistons, Eagle Rods with ARP rod bolts (Pistons and Rods are out of motor since bought seperately) Everything is in great condition, no defects at all - $1000 if local $800
My friend made a video while checking out the block. the pistons and rods shown in the video was the ones that were in the block and are not the Wiseco pistons or the Eagle rods
If I don't sell soon, I'm going to assemble and UP the price
https://www.facebook.com/photo.php?v=318454374861592
60mm+ I think, some told me 60 and some told me 75 HOLLEY THROTTLE BODY **Missing spring/ throttle bracket- $100
BNIB Greddy Oil Catch can - $100
VIPER 5701 2 WAY ALARM BNIB- $250
Supertech Valvetrain (Valves, Dual springs, retainers, valve seals)- $old!!!
Black Valve cover Vented with bungs and AEROQUIP lines and fittings- $old!!!
Neptune RTP DEMON installed in P28. I have license and serial number- $480
Greddy Profec Spec B Boost controller BNIB w/manual, warranty, hardware- $280
B16 ARP head studs, washers, nuts, engine oil BNIB- $old!!!
Ported and Polished, Hot tanked, Built with Blox valvetrain, LEGIT ITR CAMS, 0 miles comes with wrinkle red valve cover and VTEC Solenoid- $old to yewdontknowme
B16 Block Decked and Honed crank is Micropolished 0 miles complete internals already assembled (NOT SHIPPING-$500
B16 Greddy Timing belt BNIB- $90
13" Lenso's wrapped with M&H slicks Bought it on honda-tech a few weeks ago but need to sell so i can get money for tuning with John Vega. Has lots of life, the left side slick looks a little banged up from previous owners fender- $old to boost_crazy
Stock bore and compression B16 pistons with in the box- $80
Dark gray Mugen Valve cover- $90
4G63 OBX turbo manifold- $350
WILL ADD MORE ITEMS LATER
IF IT'S STILL ON THE POST, IT IS STILL AVAILABLE
Kevlar spark plug cover not included
Shipping: Included with prices but add 3% Paypal
Located: Orlando, FL
92-95 RARE Optional Middle Console with Pioneer Double Din - $600
COMPLETE B18C1 Block, stock bore, balanced and micro polished crank, 9:1 Wiseco pistons, Eagle Rods with ARP rod bolts (Pistons and Rods are out of motor since bought seperately) Everything is in great condition, no defects at all - $1000 if local $800
My friend made a video while checking out the block. the pistons and rods shown in the video was the ones that were in the block and are not the Wiseco pistons or the Eagle rods
If I don't sell soon, I'm going to assemble and UP the price
https://www.facebook.com/photo.php?v=318454374861592
60mm+ I think, some told me 60 and some told me 75 HOLLEY THROTTLE BODY **Missing spring/ throttle bracket- $100
BNIB Greddy Oil Catch can - $100
VIPER 5701 2 WAY ALARM BNIB- $250
Supertech Valvetrain (Valves, Dual springs, retainers, valve seals)- $old!!!
Black Valve cover Vented with bungs and AEROQUIP lines and fittings- $old!!!
Neptune RTP DEMON installed in P28. I have license and serial number- $480
Greddy Profec Spec B Boost controller BNIB w/manual, warranty, hardware- $280
B16 ARP head studs, washers, nuts, engine oil BNIB- $old!!!
Ported and Polished, Hot tanked, Built with Blox valvetrain, LEGIT ITR CAMS, 0 miles comes with wrinkle red valve cover and VTEC Solenoid- $old to yewdontknowme
B16 Block Decked and Honed crank is Micropolished 0 miles complete internals already assembled (NOT SHIPPING-$500
B16 Greddy Timing belt BNIB- $90
13" Lenso's wrapped with M&H slicks Bought it on honda-tech a few weeks ago but need to sell so i can get money for tuning with John Vega. Has lots of life, the left side slick looks a little banged up from previous owners fender- $old to boost_crazy
Stock bore and compression B16 pistons with in the box- $80
Dark gray Mugen Valve cover- $90
4G63 OBX turbo manifold- $350
WILL ADD MORE ITEMS LATER
IF IT'S STILL ON THE POST, IT IS STILL AVAILABLE
Kevlar spark plug cover not included
Last edited by kuhwahh; 01-20-2012 at 01:11 PM.
11-30-2011, 09:45 AM
#3
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2007
Location: windam, maine, USA
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/FT: SUPERTECH valvetrain, BUILT P&P B16 Head w/ ITR cams, Lenso Slicks & more!
How much shipped to 02026 on the slicks/lenso's?
Also what size are they?
Also what size are they?
11-30-2011, 12:44 PM
#6
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
12-01-2011, 05:31 AM
#10
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
12-01-2011, 10:35 AM
#11
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2007
Location: windam, maine, USA
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/FT: SUPERTECH valvetrain, BUILT P&P B16 Head w/ ITR cams, Lenso Slicks & more!
I need 24.5" slicks..would you sell the lenso's with no slicks on them?
12-01-2011, 04:59 PM
#12
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
12-02-2011, 07:03 AM
#14
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/FT: SUPERTECH valvetrain, BUILT P&P B16 Head w/ ITR cams, Lenso Slicks & more!
12-02-2011, 08:48 AM
#16
Honda-Tech Member
Join Date: Apr 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts