FS: 2.0L BUILT TURBO LONGBLOCK (DFE), KAAZ LSD GSR TRANNY, HIGH DOLLAR GOODIES
11-20-2007, 10:08 AM
#1
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
FS: 2.0L BUILT TURBO LONGBLOCK (DFE), KAAZ LSD GSR TRANNY, HIGH DOLLAR GOODIES
Let me start off by saying that nothing is this thread is CHEAP, nothing is EBAY, alot of it is CUSTOM and extremely expensive. ALl these parts are coming off my Brothers 4 door integra that was built over the last 5 years. HE SPARED NO EXPENSE.
He is getting out of the car scene, he has over $80,000 invested in his car. We will be parting out the ENTIRE SETUP so he can sell the car with a stock motor.
GSR LONGBLOCK ASSEMBLED BY DonF AKA DFE ENTERPRISES (SAME PRO WHO BUILT MY 2.0L LSVTEC. MOTOR WAS ENGINE DYNOED FOR BREAK IN)
2.0L GSR block sleeved by Benson's machine in California.
Crower rods, CP pistons 9:1 compression
GSR head fully ported, 5 angle valve job Crower springs and titanium retainers ferrera 1.0 mm ovesized valves
GSR cams
type r valve cover with half moon cut for camgears.
Golden eagle head gasket less than 2K on engine
Moroso Street/Strip Oil Pan with pickup
New MSD cap and rotor and wires
Will sell motor with complete with all parts including wiring harness or consider parting out certain pieces
Engine made 340whp TUNED BY ED@BALANCED PERFORMANCE. SETUP WAS NEVER PUSHED.
$3500 for everything LONGBLOCK RELATED (NO INTAKE MANIFOLD INCLUDED)
THATS FOR A COMPLETE HEAD, BLOCK, MSD SETUP, MOROSO OIL PAN, ALL NEW OEM OIL PUMP, TIMING BELT, WATER PUMP, ARP STUDS, ETC.
JG Victor X manifold Polished and nickel plated port matched with JG 68mm throttle body $850 was the total cost
$600 OBO
GSR transmission with all new internals and KAAZ LSD Perfect no grinds mint condition only 6K since rebuilt 1650 invested
$1400 OBO
Driveshaftshop level 3.9 axles and hubs with added ABS ring. preinstalled in knuckles with new wheel bearings and spare hub $1400 new good for 600+ hp only 3K on them never drag raced
$1200 OBO
Greddy oil coolerACU INTERGRA 1994-01 10row 12054602 560.00 new
MAKE OFFER
SFP manifold with 3" down pipe with HKS waste gate with all three springs and dumptube fabricated back into the down pipe with 3" flange and flex pipe all pieces 2500 degree black heat coating and copper manifold gasket
$600 OBO including the WG
Precision SC60.63 60-1 BB T31 TF Turbo good for 550 HP. 1250 new With 2500 degree temp coating exhaust housing and polished and black powder coated bell housing
$1000 OBO
He is getting out of the car scene, he has over $80,000 invested in his car. We will be parting out the ENTIRE SETUP so he can sell the car with a stock motor.
GSR LONGBLOCK ASSEMBLED BY DonF AKA DFE ENTERPRISES (SAME PRO WHO BUILT MY 2.0L LSVTEC. MOTOR WAS ENGINE DYNOED FOR BREAK IN)
2.0L GSR block sleeved by Benson's machine in California.
Crower rods, CP pistons 9:1 compression
GSR head fully ported, 5 angle valve job Crower springs and titanium retainers ferrera 1.0 mm ovesized valves
GSR cams
type r valve cover with half moon cut for camgears.
Golden eagle head gasket less than 2K on engine
Moroso Street/Strip Oil Pan with pickup
New MSD cap and rotor and wires
Will sell motor with complete with all parts including wiring harness or consider parting out certain pieces
Engine made 340whp TUNED BY ED@BALANCED PERFORMANCE. SETUP WAS NEVER PUSHED.
$3500 for everything LONGBLOCK RELATED (NO INTAKE MANIFOLD INCLUDED)
THATS FOR A COMPLETE HEAD, BLOCK, MSD SETUP, MOROSO OIL PAN, ALL NEW OEM OIL PUMP, TIMING BELT, WATER PUMP, ARP STUDS, ETC.
JG Victor X manifold Polished and nickel plated port matched with JG 68mm throttle body $850 was the total cost
$600 OBO
GSR transmission with all new internals and KAAZ LSD Perfect no grinds mint condition only 6K since rebuilt 1650 invested
$1400 OBO
Driveshaftshop level 3.9 axles and hubs with added ABS ring. preinstalled in knuckles with new wheel bearings and spare hub $1400 new good for 600+ hp only 3K on them never drag raced
$1200 OBO
Greddy oil coolerACU INTERGRA 1994-01 10row 12054602 560.00 new
MAKE OFFER
SFP manifold with 3" down pipe with HKS waste gate with all three springs and dumptube fabricated back into the down pipe with 3" flange and flex pipe all pieces 2500 degree black heat coating and copper manifold gasket
$600 OBO including the WG
Precision SC60.63 60-1 BB T31 TF Turbo good for 550 HP. 1250 new With 2500 degree temp coating exhaust housing and polished and black powder coated bell housing
$1000 OBO
Thread
Thread Starter
Forum
Replies
Last Post
Mannykiller
Southern California (Sales)
6
12-19-2009 08:55 AM
Samuels
Mid-Atlantic (Sales)
6
03-17-2008 06:49 AM
aser1z
For Sale
3
12-25-2007 02:27 PM
12thstreetjunkman
For Sale
20
05-30-2004 01:25 PM
