Built 2000 Civic Part Out...
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Built 2000 Civic Part Out...
Gave up on my Honda, and Honda's in general so I'm gonna part it out. I know economy is tough so I set prices as low as I can really go but feel free to make a reasonable offer.
Built ITR Motor 84mmx89mm
-B18C5
-Sleeved by AEBS
-84mm Wiseco Pistons 10:1 Compression
-Manley Turbo Tuff Rods
-Golden Eagle Crank
-Golden Eagle Oil Plug Squirters to accomodate 89mm crank
-Cosmetic Head Gasket
-New OEM ITR Oil Pump, Timing belt, Water Pump and every seal/gasket (Bought a master kit, pretty useful)
-ITR Head
-Blox Cam seal
-ITR/GSR Cam Combo
-RMF Header
-OEM SI Intake manifold. Port Matched
-Hondata Intake Gasket
-AEM Fuel Rail
-850CC Bosch Saturated Injectors
-Supertech Valve train and domed valves
-Head was resurfaced for block
Will include Avid racing motor mounts.
I think thats everything... I'll have pics of the motor when I have free time. I have pics of when it was being built. I bought it sleeved and had it machined and all of the work done at a local machine shop.
$2500 + Shipping
GSR Transmission rebuilt by a local shop. - $250 plus shipping.
Next up I have Tein SuperStreet Suspension for a 99-00 civic for the front, and Tein Basic for the back. $400 + Oem Suspension Pictures will be hard to get but I'll try.
I have also have a rear disc conversion off a 99-00 SI. Comes complete with Rotors, Brake lines etc. WILL NEED PADS $85 + shipping
99-00 SI Rear sway bar - $45 + shipping
Built ITR Motor 84mmx89mm
-B18C5
-Sleeved by AEBS
-84mm Wiseco Pistons 10:1 Compression
-Manley Turbo Tuff Rods
-Golden Eagle Crank
-Golden Eagle Oil Plug Squirters to accomodate 89mm crank
-Cosmetic Head Gasket
-New OEM ITR Oil Pump, Timing belt, Water Pump and every seal/gasket (Bought a master kit, pretty useful)
-ITR Head
-Blox Cam seal
-ITR/GSR Cam Combo
-RMF Header
-OEM SI Intake manifold. Port Matched
-Hondata Intake Gasket
-AEM Fuel Rail
-850CC Bosch Saturated Injectors
-Supertech Valve train and domed valves
-Head was resurfaced for block
Will include Avid racing motor mounts.
I think thats everything... I'll have pics of the motor when I have free time. I have pics of when it was being built. I bought it sleeved and had it machined and all of the work done at a local machine shop.
$2500 + Shipping
GSR Transmission rebuilt by a local shop. - $250 plus shipping.
Next up I have Tein SuperStreet Suspension for a 99-00 civic for the front, and Tein Basic for the back. $400 + Oem Suspension Pictures will be hard to get but I'll try.
I have also have a rear disc conversion off a 99-00 SI. Comes complete with Rotors, Brake lines etc. WILL NEED PADS $85 + shipping
99-00 SI Rear sway bar - $45 + shipping
#6
Honda-Tech Member
Join Date: Jun 2007
Location: Doha, Qatar, Qatar
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Re: Built 2000 Civic Part Out...
can you send me your final price and if your welling to sell withoutthe intake manifold, am intersted in the long block with the tranny, and do you ship internationaly.
thanks allot
thanks allot
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
TurboR1391
Vehicles for sale
44
09-08-2006 07:08 AM