84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil Pum
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Eastern Coast Rocks, NY, USA
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil Pum
84.5MM Dart Block,
Endyn RW Pistons w/ raised pin @ 13.5:1
Endyn Long Rods, Endyne Modified Oil Pump gear
ATI Crank dampner
89mm Eagle Knife-edged crank
Spoon baffled oil pan -
-Fully assembled
-less than 500 pampered miles
-Properly broken in
-never raced
$4,000 obo
Dyno'd 242hp and 167tq with a rough tuning
Endyn RW Pistons w/ raised pin @ 13.5:1
Endyn Long Rods, Endyne Modified Oil Pump gear
ATI Crank dampner
89mm Eagle Knife-edged crank
Spoon baffled oil pan -
-Fully assembled
-less than 500 pampered miles
-Properly broken in
-never raced
$4,000 obo
Dyno'd 242hp and 167tq with a rough tuning
#6
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Eastern Coast Rocks, NY, USA
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jg »</TD></TR><TR><TD CLASS="quote">tall deck, or standard height?</TD></TR></TABLE>
This is a standard height deck. But the long rods and raised piston pins give it the same rod stroke ratio (for those concerned with R/S ratios) as an ITR/GSR block.
I had considered the tall deck, but there seemed to be alot of customizing with the tall decks and I have yet to see too many running properly out there. I am not saying that they aren't out there, just that I haven't seen them.
This is a standard height deck. But the long rods and raised piston pins give it the same rod stroke ratio (for those concerned with R/S ratios) as an ITR/GSR block.
I had considered the tall deck, but there seemed to be alot of customizing with the tall decks and I have yet to see too many running properly out there. I am not saying that they aren't out there, just that I haven't seen them.
#7
Honda-Tech Member
Join Date: Mar 2001
Location: North East
Posts: 4,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
WHY??? bigger and better things or done with imports?
That's Freaking CHEAP..
That's Freaking CHEAP..
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Eastern Coast Rocks, NY, USA
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
Lets just say bigger and better things
Where are the "big ballers"?
Where are the "big ballers"?
#10
Honda-Tech Member
Join Date: Jan 2004
Location: Unknown
Posts: 2,733
Likes: 0
Received 0 Likes
on
0 Posts
Re: (speedyonez)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by speedyonez »</TD></TR><TR><TD CLASS="quote">guy is a **** sucker ...... i wouldnt buy **** from him ... </TD></TR></TABLE>
#14
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Eastern Coast Rocks, NY, USA
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
Yes it is still available. Thanks for the bump....
#15
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Eastern Coast Rocks, NY, USA
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
Yes it is still available. Thanks for the bump....
#16
Honda-Tech Member
Join Date: Mar 2002
Location: Pittsburgh, PA, USA
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
If I didn't already send you so much money for other things I might have bought this to Bump for a bulletproof motor
#17
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Eastern Coast Rocks, NY, USA
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
I am going to throw this thing away if someone doesn't make a respectible offer
#18
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
Don't throw it away..... I'll drive over to pick it up before you do that. You know I want it, but you would not like my offer......
Mind you rings in my LS block are really starting to go...... giving some good smoke shows... not tire smoke though
Pascal
Mind you rings in my LS block are really starting to go...... giving some good smoke shows... not tire smoke though
Pascal
#20
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
When is garbage day..... It'll take me about 4 days to get there.
Seriously, I'll drop you an e-mail, maybe we can work something out
Pascal
Seriously, I'll drop you an e-mail, maybe we can work something out
Pascal
#21
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Eastern Coast Rocks, NY, USA
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
Okay someone must want to make some excellent power
#22
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Eastern Coast Rocks, NY, USA
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
Come and get your Dart Block!!!
#23
Honda-Tech Member
Join Date: Mar 2001
Location: North East
Posts: 4,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: 84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Christian »</TD></TR><TR><TD CLASS="quote">Okay someone must want to make some excellent power </TD></TR></TABLE>
I want too.. I'll trade you my 53 widescreen for it , damm thing wont fit in my new place..lol
I want too.. I'll trade you my 53 widescreen for it , damm thing wont fit in my new place..lol