4F CoL's GARAGE CLEANOUT!! Kseries, Bseries, Mugen, more!!! MUST GO, PA!!!
#1
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: In my kevlar STATUS Legunas, PALLDAY
Posts: 5,614
Likes: 0
Received 0 Likes
on
0 Posts
4F CoL's GARAGE CLEANOUT!! Kseries, Bseries, Mugen, more!!! MUST GO, PA!!!
Hey fellas. I finally got my stock motor out of my car. It is an '03 RSX-S motor with about 57k on it. I AM NOT SELLING THE MOTOR WHOLE, DONT ASK! Here is what I am selling from it. It has not been dis-assembled but will be this weekend.
Stock Tranny with 4.4 final: $PENDING!!!
K20a2 head with spings, reatiners, and valves ONLY!: $800
K20A2 oil pan with oil return fitting for turbo guys: $120
K20a2 oil pump: $100
K20a2 valve covers (I have 2): $50 each
K20a2 rolling block (block, pistons, rods, girdle only): $750
k20a2 stock rsx s cams: $OLD
stock rsx-s flywheel: $50 shipped
I also have a spare k24a4 block. It's gutted, just block and girdle, ready for a hone or sleeving. I bought it from Hmotors a while ago with intention of sleeving but I bought a pre-sleeved block instead. Asking $350
Stock K24a4 rods and pistons: $50 for all 4
Stock k24a4 head bare, just springs, retainers, and valves: $75
<U>Other things:</U>
LHP, Lance Hayward Performance, 54mm Kseries Race ITB's. KEEPING THEM NOW!
S2000 guage cluster. SOLD!
A '99 civic Si guage cluster SOLD
Integra Type-R wrapped rear seats for EK hatch. these will bolt right into your EK hatch. The cloth is non faded and there are 3 little burns in the bench part of the seat. $ 175
1 EK Mugen wing. No 3rd brakelight. Needs fiberglass work. $450 or $525wing 1:
Wing 2:
1 EK4-7 Mugen Lip (96-98). SOLD SOLD SOLD SOLD!!!!
1 Mugen Aero Bumper for EK4-7 (96-98). some fiberglass work needed. $700 or $1200
'00 Integra GSR motor. Has about 53k on it. It has not been driven in 14 months. It was my old car and my friend who now owns it wants to go K. It is in perfect working condition. Will come with matching '00 gsr tranny. $2900
Omni power sleeves for EK. SOLD
Brand new Password JDM intake SOLD!!!
Skunk2 68mm B series throttle body SOLD!!
Skunk2 intake manifold for GSR, brand new. SOLD!!!!
<U>If you are interested in anything, please post, PM me or EMAIL ME: ColinMcK@verizon.net</U>
<U>Shipping is not included unless stated!</U>
I will accept payment only though cash, Money Order, bank/tellers cheque, or paypal plus the 3.3% fee.
I am a verified seller and buyer and have many certain and known vouches in my signature. If there is something you are not satisfied with or something is no good, i'll work with you. Im not out to scam or F*ck anyone over, just to make some more money to finish my car and help some people out.
PLEASE BUMP IF YOU VIEW!
thanks guys
-Colin
Modified by 4F_ Mugen CoL at 7:59 PM 2/25/2008
Modified by 4F_ Mugen CoL at 11:53 AM 2/26/2008
Modified by 4F_ Mugen CoL at 11:54 AM 2/26/2008
Modified by 4F_ Mugen CoL at 10:48 PM 2/26/2008
Modified by 4F_ Mugen CoL at 9:10 PM 3/1/2008
Modified by 4F_ Mugen CoL at 4:47 PM 3/4/2008
Modified by 4F_ Mugen CoL at 3:34 PM 3/25/2008
Stock Tranny with 4.4 final: $PENDING!!!
K20a2 head with spings, reatiners, and valves ONLY!: $800
K20A2 oil pan with oil return fitting for turbo guys: $120
K20a2 oil pump: $100
K20a2 valve covers (I have 2): $50 each
K20a2 rolling block (block, pistons, rods, girdle only): $750
k20a2 stock rsx s cams: $OLD
stock rsx-s flywheel: $50 shipped
I also have a spare k24a4 block. It's gutted, just block and girdle, ready for a hone or sleeving. I bought it from Hmotors a while ago with intention of sleeving but I bought a pre-sleeved block instead. Asking $350
Stock K24a4 rods and pistons: $50 for all 4
Stock k24a4 head bare, just springs, retainers, and valves: $75
<U>Other things:</U>
LHP, Lance Hayward Performance, 54mm Kseries Race ITB's. KEEPING THEM NOW!
S2000 guage cluster. SOLD!
A '99 civic Si guage cluster SOLD
Integra Type-R wrapped rear seats for EK hatch. these will bolt right into your EK hatch. The cloth is non faded and there are 3 little burns in the bench part of the seat. $ 175
1 EK Mugen wing. No 3rd brakelight. Needs fiberglass work. $450 or $525wing 1:
Wing 2:
1 EK4-7 Mugen Lip (96-98). SOLD SOLD SOLD SOLD!!!!
1 Mugen Aero Bumper for EK4-7 (96-98). some fiberglass work needed. $700 or $1200
'00 Integra GSR motor. Has about 53k on it. It has not been driven in 14 months. It was my old car and my friend who now owns it wants to go K. It is in perfect working condition. Will come with matching '00 gsr tranny. $2900
Omni power sleeves for EK. SOLD
Brand new Password JDM intake SOLD!!!
Skunk2 68mm B series throttle body SOLD!!
Skunk2 intake manifold for GSR, brand new. SOLD!!!!
<U>If you are interested in anything, please post, PM me or EMAIL ME: ColinMcK@verizon.net</U>
<U>Shipping is not included unless stated!</U>
I will accept payment only though cash, Money Order, bank/tellers cheque, or paypal plus the 3.3% fee.
I am a verified seller and buyer and have many certain and known vouches in my signature. If there is something you are not satisfied with or something is no good, i'll work with you. Im not out to scam or F*ck anyone over, just to make some more money to finish my car and help some people out.
PLEASE BUMP IF YOU VIEW!
thanks guys
-Colin
Modified by 4F_ Mugen CoL at 7:59 PM 2/25/2008
Modified by 4F_ Mugen CoL at 11:53 AM 2/26/2008
Modified by 4F_ Mugen CoL at 11:54 AM 2/26/2008
Modified by 4F_ Mugen CoL at 10:48 PM 2/26/2008
Modified by 4F_ Mugen CoL at 9:10 PM 3/1/2008
Modified by 4F_ Mugen CoL at 4:47 PM 3/4/2008
Modified by 4F_ Mugen CoL at 3:34 PM 3/25/2008
#4
Honda-Tech Order of Merit
iTrader: (4)
Join Date: Dec 2003
Location: PA
Posts: 10,337
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4F CoL's GARAGE CLEANOUT!! Kseries, Bseries, Mugen, more!!! MUST GO, PA!!! (4F_ Mugen CoL)
BUMP FOR COLIN!
mike wants the si cluster and i want the edelbrock oil cap off the b-series
mike wants the si cluster and i want the edelbrock oil cap off the b-series
#6
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: In my kevlar STATUS Legunas, PALLDAY
Posts: 5,614
Likes: 0
Received 0 Likes
on
0 Posts
Re: (kOMBObomber yee)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kOMBObomber yee »</TD></TR><TR><TD CLASS="quote">damn it. i wanted the street itbs </TD></TR></TABLE>
I kinda did too oh well...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hypeR_ash »</TD></TR><TR><TD CLASS="quote">bump for a great guy and seller! good luck </TD></TR></TABLE>
thanks ash!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris. »</TD></TR><TR><TD CLASS="quote">BUMP FOR COLIN!
mike wants the si cluster and i want the edelbrock oil cap off the b-series </TD></TR></TABLE>
should I consider the cluster sold?
I kinda did too oh well...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hypeR_ash »</TD></TR><TR><TD CLASS="quote">bump for a great guy and seller! good luck </TD></TR></TABLE>
thanks ash!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris. »</TD></TR><TR><TD CLASS="quote">BUMP FOR COLIN!
mike wants the si cluster and i want the edelbrock oil cap off the b-series </TD></TR></TABLE>
should I consider the cluster sold?
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: In my kevlar STATUS Legunas, PALLDAY
Posts: 5,614
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RDix)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RDix »</TD></TR><TR><TD CLASS="quote">oh yea...make that money...great seller with awesome parts all the time </TD></TR></TABLE>
thanks homie, same goes for you
thanks homie, same goes for you
#10
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: In my kevlar STATUS Legunas, PALLDAY
Posts: 5,614
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Mr.OB*GYN_Rhett)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.OB*GYN_Rhett »</TD></TR><TR><TD CLASS="quote">i look at all this and i see a bunch of poo poo </TD></TR></TABLE>
thanks homeslice
thanks homeslice
#15
Honda-Tech Member
Join Date: Mar 2007
Location: sicklerville, nj, us
Posts: 1,554
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Chris.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris. »</TD></TR><TR><TD CLASS="quote">this
thread
is
awesome!</TD></TR></TABLE>no in this thread, part talk only
thread
is
awesome!</TD></TR></TABLE>no in this thread, part talk only
#16
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: In my kevlar STATUS Legunas, PALLDAY
Posts: 5,614
Likes: 0
Received 0 Likes
on
0 Posts
Re: (4f_B_Doc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4f_B_Doc »</TD></TR><TR><TD CLASS="quote">no in this thread, part talk only</TD></TR></TABLE>
this is true, I dont want this to turn into a talk about 4x4 s2000's there is already a thread for that: https://honda-tech.com/zerothread?id=2215601
this is true, I dont want this to turn into a talk about 4x4 s2000's there is already a thread for that: https://honda-tech.com/zerothread?id=2215601
#22
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: In my kevlar STATUS Legunas, PALLDAY
Posts: 5,614
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4F CoL's GARAGE CLEANOUT!! Kseries, Bseries, Mugen, more!!! MUST GO, PA!!! (j nepo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by j nepo »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
thanks homie
thanks homie
#23
B*a*n*n*e*d
iTrader: (1)
Join Date: Mar 2004
Location: new jersey home of wanna be's posers claimers ricers biters and where everyone fakes the funk
Posts: 17,751
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4F CoL's GARAGE CLEANOUT!! Kseries, Bseries, Mugen, more!!! MUST GO, PA!!! (4F_ Mugen CoL)
COLIN