Official RR/AX FS/WTB Thread
10-13-2008, 12:30 PM
#1276
Honda-Tech Member
Join Date: Feb 2003
Location: socal
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
fs; alpinestars balaclava
http://www.vividracing.com/cat....html
like the one shown above. brand new, unopened. one size fits all.
i bought 2 to use on a track weekend, 1 for each day. i have since bought a new helmet w/ a removeable liner, so i'm selling at least 1 of my balaclavas.
socal. looking to get what i paid, obo.
Modified by tom_l at 10:43 PM 10/13/2008
like the one shown above. brand new, unopened. one size fits all.
i bought 2 to use on a track weekend, 1 for each day. i have since bought a new helmet w/ a removeable liner, so i'm selling at least 1 of my balaclavas.
socal. looking to get what i paid, obo.
Modified by tom_l at 10:43 PM 10/13/2008
10-14-2008, 07:49 AM
#1279
Join Date: Apr 2002
Location: Ashburn, va, us
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
FS: SSR competition 4x100
This is a set of four SSR competitions 15x6.5, +42mm, 4x100, 9 pounds each.
These were painted flat black when new, and have held up great over the years. There are NO bends, no curb rash, no major scratches or chips aside from minor scuffs around the outer edge from tire mounting.
205/50/15 RA1s mounted, used one race weekend, and one track day. Plenty of autocross life left, or a full track weekend. Recently balanced.
I can separate the wheels and tires if needed.
These retail for $300 each on http://www.tirerack.com and I'll sell for $800 with tires.
$700 w/o tires.
I will meet a buyer within a few hours drive of Sterling VA.
email spilkert@hotmail.com if intersted.
These were painted flat black when new, and have held up great over the years. There are NO bends, no curb rash, no major scratches or chips aside from minor scuffs around the outer edge from tire mounting.
205/50/15 RA1s mounted, used one race weekend, and one track day. Plenty of autocross life left, or a full track weekend. Recently balanced.
I can separate the wheels and tires if needed.
These retail for $300 each on http://www.tirerack.com and I'll sell for $800 with tires.
$700 w/o tires.
I will meet a buyer within a few hours drive of Sterling VA.
email spilkert@hotmail.com if intersted.
10-14-2008, 07:52 AM
#1280
Join Date: Apr 2002
Location: Ashburn, va, us
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
FS-15/16 brake master cyl and booster
This is a used OEM NISSIN 15/16" brake master cylinder and booster from a 95 civic sedan EX (four wheel disc, big front brake, ABS). This was in perfect working condition when it was installed on its orignal vehicle.
Needed for rear disc brake conversions on civics that came with rear drums, or as a replacement for 94-01 integra GS/LS/RS or civics that came with rear disc brakes.
$100
will meet buyer near sterling virginia.
email spilkert@hotmail.com
Needed for rear disc brake conversions on civics that came with rear drums, or as a replacement for 94-01 integra GS/LS/RS or civics that came with rear disc brakes.
$100
will meet buyer near sterling virginia.
email spilkert@hotmail.com
10-14-2008, 11:42 AM
#1281
I forgot more about hondas then you will ever know....
Join Date: Feb 2001
Location: hop,skip, and a jump from the city,, new friggin york, USA
Posts: 5,310
Likes: 0
Received 1 Like
on
1 Post
Re: FS-15/16 brake master cyl and booster (EG8steve)
full fiberglass flared fenders for 92-95 hatch's and coupes. ready for pickup $400
pm me here, or hit me up on aim/email b18c5rodney@aol.com thanks.
pm me here, or hit me up on aim/email b18c5rodney@aol.com thanks.
10-15-2008, 04:30 AM
#1282
Honda-Tech Member
iTrader: (3)
Join Date: Feb 2002
Location: Carlisle, PA, usa
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS-15/16 brake master cyl and booster (Rodney)
Harbor Freight tire trailer
- 12" wheels
- has Maryland title
- looking to get $250 OBO
located in Carlisle PA 17015
- 12" wheels
- has Maryland title
- looking to get $250 OBO
located in Carlisle PA 17015
10-17-2008, 05:51 AM
#1285
Honda-Tech Member
Join Date: Aug 2004
Location: IA, US
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
FS: NEW Sparco Pro-2000 racing seat FIA fiberglass black cloth
*** $500 FREE shipping + FREE brackets *** each
I have two new Sparco Pro 2000 (fiberglass) racing seats in black, FIA homologated. Purchased with intentions to use in a SCCA ITA car, but money issues stopped the build. Amazing comfort, style, and lightweight. Can be used for your street car or track car.
Paid $720 each, want *** $500 FREE shipping + FREE brackets *** each
I also have a set of steel brackets if interested (although they also make light weight aluminum brackets $50).
Description:
The Sparco PRO 2000 racing seat is extremely light-weight and rigid. The Pro 2000 has excellent lateral grip on the whole of the body, is very comfortable and is equipped with special, adjustable lateral lumbar supports. The Pro 2000 popular choice for road and off road racing for driver under 200lbs. 32-36" waist. Weighs in at 15.9 lbs
I am 6' 1" 185 lbs and 33", without helmet, top of head is just lower than the top of the seat. Very conforming and comfortable. Love the lumbar supports!
*** $500 FREE shipping + FREE brackets *** each
I have more pictures of actual seat, let me know and I will email them.
B16aVtecCRX@hotmail.com
Modified by Andy R at 9:04 AM 10/22/2008
I have two new Sparco Pro 2000 (fiberglass) racing seats in black, FIA homologated. Purchased with intentions to use in a SCCA ITA car, but money issues stopped the build. Amazing comfort, style, and lightweight. Can be used for your street car or track car.
Paid $720 each, want *** $500 FREE shipping + FREE brackets *** each
I also have a set of steel brackets if interested (although they also make light weight aluminum brackets $50).
Description:
The Sparco PRO 2000 racing seat is extremely light-weight and rigid. The Pro 2000 has excellent lateral grip on the whole of the body, is very comfortable and is equipped with special, adjustable lateral lumbar supports. The Pro 2000 popular choice for road and off road racing for driver under 200lbs. 32-36" waist. Weighs in at 15.9 lbs
I am 6' 1" 185 lbs and 33", without helmet, top of head is just lower than the top of the seat. Very conforming and comfortable. Love the lumbar supports!
*** $500 FREE shipping + FREE brackets *** each
I have more pictures of actual seat, let me know and I will email them.
B16aVtecCRX@hotmail.com
Modified by Andy R at 9:04 AM 10/22/2008
10-17-2008, 07:41 AM
#1286
Honda-Tech Member
Re: FS: NEW Sparco Pro-2000 racing seat FIA fiberglass black cloth (Andy R)
FS: autopower race roll bar. same as the one pictured. goes into a 92-95 civic 2dr coupe or hatchback with or without a sunroof. (I'm not sure, but it might also fit the 94-01 integra)
was in a 93 2dr ex only for a few months. never raced or in any accidents. there are a few scratches from the seatbelts.
I have around $550 in it with shipping. would like to get $400 for it. Shipping is $80 extra, but I will cover any additional cost.
was in a 93 2dr ex only for a few months. never raced or in any accidents. there are a few scratches from the seatbelts.
I have around $550 in it with shipping. would like to get $400 for it. Shipping is $80 extra, but I will cover any additional cost.
10-18-2008, 11:06 PM
#1290
Junior Member
Join Date: Jun 2008
Location: Phoenix, AZ, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Full Race DC/EG Traction Bar(ProStreet) $300obo
LOCATED IN PHOENIX, AZ
I'm selling my Full Race ProStreet Traction Bar off of my DC Integra. This will work on EG Civics aswell and can be modified to fit EF's and DA's. Driver side Radius Rod has marks on it. Does not compromise the rod. $300 Make an offer. Or Trade for 4 Brand New 205/40 R17 Nitto Neogens or comparable ONLY
Full-Race traction bars are designed for road or drag race cars. This part is a must for every driver seeking to increase traction, lower 60 ft times, and eliminate wheel hop.
Key engineered features include:
1. Bolt on installation, no welding required.
2. Will accomodate large downpipes and or headers.
3. Designed with PERFECT suspension geometry, will not cause binding.
4. Aluminum knurled radius arms allow for quick and easy caster adjustment.
5. DOM crossbar is hand fabricated and precision welded.
6. Full Race Traction bars are CAD designed. They are engineered with a factor of safety (FOS) of 3.2, meaning they are 3.2 times stronger than they need to be.
Picture off Full-Race.com
Product Description:
http://www.full-race.com/catal...e4649
I'm selling my Full Race ProStreet Traction Bar off of my DC Integra. This will work on EG Civics aswell and can be modified to fit EF's and DA's. Driver side Radius Rod has marks on it. Does not compromise the rod. $300 Make an offer. Or Trade for 4 Brand New 205/40 R17 Nitto Neogens or comparable ONLY
Full-Race traction bars are designed for road or drag race cars. This part is a must for every driver seeking to increase traction, lower 60 ft times, and eliminate wheel hop.
Key engineered features include:
1. Bolt on installation, no welding required.
2. Will accomodate large downpipes and or headers.
3. Designed with PERFECT suspension geometry, will not cause binding.
4. Aluminum knurled radius arms allow for quick and easy caster adjustment.
5. DOM crossbar is hand fabricated and precision welded.
6. Full Race Traction bars are CAD designed. They are engineered with a factor of safety (FOS) of 3.2, meaning they are 3.2 times stronger than they need to be.
Picture off Full-Race.com
Product Description:
http://www.full-race.com/catal...e4649
10-19-2008, 12:15 AM
#1291
Honda-Tech Member
Join Date: Sep 2002
Location: Orange County, CA, USA
Posts: 12,758
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Tyson)
F/S: Comptech 22mm sway bar for EG/DC chassis. I will include: sway bar, d brackets, bolts/washers, spherical endlinks. Comptech subframe brace NOT included.
<FONT SIZE="4">Asking $160 OBO PICKED UP IN Irvine.</FONT>
Modified by .:Made in OC:. at 11:32 AM 10/21/2008
<FONT SIZE="4">Asking $160 OBO PICKED UP IN Irvine.</FONT>
Modified by .:Made in OC:. at 11:32 AM 10/21/2008
10-19-2008, 05:02 PM
#1292
Honda-Tech Member
Join Date: Jun 2006
Location: AZ, United States
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
J's Racing GT Wing Universal: Integra, Civic, S2000 etc
Old School J's Racing GT Wing Universal: Integra, Civic, S2000 etc
SOLDSOLD SOLD
Modified by 6spdKEG at 8:24 AM 10/20/2008
SOLDSOLD SOLD
Modified by 6spdKEG at 8:24 AM 10/20/2008
Last edited by 6spdKEG; 11-25-2008 at 06:35 PM.
10-19-2008, 11:23 PM
#1293
Honda-Tech Member
Up for sale is another set of 17CL15VN calipers with the matching brackets. The asking price is $100obo If you need more info, I can be reached through email at BigDare23@tmail.com or on aim using the same address (yeah my whole email address is my screenname).
10-20-2008, 03:10 PM
#1294
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2008
Location: Blah Blah Blah, wa, Erf
Posts: 2,938
Likes: 0
Received 7 Likes
on
6 Posts
Re: (Tyson)
H series Saenz forged straight cut gear set (3.071 1st, 2.153 2nd, 1.667 3rd, 1.30 4th and 1.00 5th gear)… they are pretty short… My 600 + WHP H made VERY short work of the gears even in the heavy CD5. The car accelerated ridiculously quickly. Fifth shifts smooth, just like from 2-3. Not the typical H series hard shift. Its whiny and sexy, I drove it on the street. Uses stock Countershaft... and the input is forged Saenz (all gberars are straightcut). Never had an issue with either, but have an extra FD I'll include...
M2Y4 case (seriously MINT, looks like NEW) that’s been checked for cracks.
New OBX LSD with less than 200 Miles on it.
New OEM case bearings
New OEM diff carrier bearings
New OEM shims
New syncros.
I’ve run only Redline Lightweight shockproof oil in it.
Box shifts like butter and is in VERY good shape. Everything is MINT… and new or very close to new. I have replaced 3rd gear with their newer updated one as well… OBX diff was installed with new carrier bearings (OEM) and shimmed fror proper preload.
I have all contact info for Saenz and a working relationship with Gabriel in Argentina where the parts are manufactured (yes all replacement parts are available for it). It uses OEM syncros.
Selling my car and put a JDM LSD tranny in it for the sale. SO, this box has to go.
Asking 3500 Shipped, I’m negotiable, but will NOT part it out.
Thank you.
UPDATED 3rd gear:
M2Y4 case (seriously MINT, looks like NEW) that’s been checked for cracks.
New OBX LSD with less than 200 Miles on it.
New OEM case bearings
New OEM diff carrier bearings
New OEM shims
New syncros.
I’ve run only Redline Lightweight shockproof oil in it.
Box shifts like butter and is in VERY good shape. Everything is MINT… and new or very close to new. I have replaced 3rd gear with their newer updated one as well… OBX diff was installed with new carrier bearings (OEM) and shimmed fror proper preload.
I have all contact info for Saenz and a working relationship with Gabriel in Argentina where the parts are manufactured (yes all replacement parts are available for it). It uses OEM syncros.
Selling my car and put a JDM LSD tranny in it for the sale. SO, this box has to go.
Asking 3500 Shipped, I’m negotiable, but will NOT part it out.
Thank you.
UPDATED 3rd gear:
10-21-2008, 07:46 AM
#1296
Honda-Tech Member
Join Date: Jan 2002
Location: USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
10-21-2008, 11:02 AM
#1298
Honda-Tech Member
Join Date: Nov 2003
Location: Ya mothas undapants, USA
Posts: 2,075
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hoosier R6 225-45-15 (RoadRacer46)
Selling (4) Konig Heliums 15x6.5 +40 w/ Hankook R-S2s. I believe. Almost brand new, just a few weeks on the car, under 1000mi w/no autox on them. $750 OBO
Located just north of NYC
http://www.hondamarketplace.com/zerothread/2412194
Located just north of NYC
http://www.hondamarketplace.com/zerothread/2412194
10-21-2008, 03:32 PM
#1300
B*a*n*n*e*d
Join Date: Jun 2008
Posts: 1,831
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale & WTB (.RJ)
FS: Tein N1 full race spec dampers for 96-00 Civic EK9
20kg spring rate front
24kg spring rate rear
$1600 + shipping
used for less than 1 season
Modified by dumafit at 6:31 PM 10/22/2008
20kg spring rate front
24kg spring rate rear
$1600 + shipping
used for less than 1 season
Modified by dumafit at 6:31 PM 10/22/2008