spot priming engine bay this weekend need advice
05-24-2019, 08:26 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2016
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
spot priming engine bay this weekend need advice
Using PPG deltron paint here boys.
I got ahead of myself and da'd the bay early. Now I have some flash rust popping up. This is my plan so far
1. DA everything again with 320 6"
2. DA every bare metal spot with a 3" pistol grip at 180 per the tech sheets
3. blow it off
4. wash
5. acetone wipe
6. blow it off then tack rag
7. sx 320
8. primer
I got ahead of myself and da'd the bay early. Now I have some flash rust popping up. This is my plan so far
1. DA everything again with 320 6"
2. DA every bare metal spot with a 3" pistol grip at 180 per the tech sheets
3. blow it off
4. wash
5. acetone wipe
6. blow it off then tack rag
7. sx 320
8. primer
Thread
Thread Starter
Forum
Replies
Last Post