EG Hatchback Windshield Seals and Molding
#1
Honda-Tech Member
Thread Starter
EG Hatchback Windshield Seals and Molding
Recently picked up a 1992 Hatchback, it's almost entirely stock, including original rubber molding and seals all around. Needless to say, after 20 years of life in Ohio and then 6 years in the California desert, most of this exterior rubber is shot and needs to be replaced. There are some good rock chips in my windshield, so I figured if I get the glass replaced I could also replace all the rubber as well. Just want to make sure I get the right parts, and I don't want to buy parts I don't need either. I'm planning on ordering the following parts according to the linked diagram: 2,3,5,6,and 7. Do I also need to get #4 or any of the eight #15 parts?
https://www.hondapartsonline.net/aut...indshield-scat
https://www.hondapartsonline.net/aut...indshield-scat
Thread
Thread Starter
Forum
Replies
Last Post
hoffmanp
Honda Civic / Del Sol (1992 - 2000)
4
02-02-2014 08:01 AM