Bay area: all motor b20b non vtec longblock, ANR header, misc parts! obo deals!
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: around, ca, us
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
Bay area: all motor b20b non vtec longblock, ANR header, misc parts! obo deals!
MOTOR SOLD
98 JDM b20b.
Story; I purchased this motor from attarco almost 2 years ago. Had the motor stock for about 10K miles. Decided to go with the crower 403's and ive had them in for about 15K miles. This motor is very strong. Made good power for a non vtec motor and the only reason i took it out was because i went with a h2b. I babied the crap outa this thing. Mobil 1 full synthetic every 2500-3000k miles. I did a compression test before i pulled the motor out and it was 210psi across the board!!. Also timing belt and water pump was replaced when the motor was first put in, so about 25k on them.
What it will include:
Longblock, all sensors, dizzy, ect..
crower 403 cams
crower dual valve springs.
golden eagle cam gears
skunk2 intake manifold
gsr throttle body
stage 2 street disk, and 9lb flywheel.(clutch still grabs hard and has about 25k miles)
ROM with tune burned on it.
(will also include all stock stuff, cams, valvesprings, cam gears, ect.. minus the intake manifold.)
Tuned by Jeremy at RedZone, this is what it made:
I am looking for $800 obo for the long block and all listed above
--------------------------------------------------------------------------------------------
B series ANR Compact Header:
Very unique header and makes good power. Cant find too many of them anymore.
See the power it made on my motor above^^^^^ I know the welds look like sheit but the previous owner did that to strengthen it up but this header will not crack if you run a flex pipe
I am asking $350 obo for the header
--------------------------------------------------------------------------------------------
Random parts for sale:
Obd1 h22a egr valve.
Best offer
h22 manifold and heatsheild
Best offer
93 integra intermediate shaft, half shaft.
BEst offer
93 integra ls throttle body
Best oFFer
98 civic half radiator
Best offer
Maremont 2.5in Catalytic converter, used for 100 miles.
Best offer
MOunts for b series in EK
Best offfer!!
93 integra taillights, ok condition, one has 2 small cracks and other is good.(cracks in pic)
93 pr4 ls block,rods, crank, almost complete short block minus pistons because the ringlands are shot.
PIcs upon request( i have to dig the block out from under a bunch of stuff)
Best offer
93 integra da9 cluster, Illuminates a dark orange/red.
Any questions pm me or post Thanks!
Modified by watsvtecEK at 1:13 AM 2/29/2008
Modified by watsvtecEK at 9:30 PM 3/9/2008
98 JDM b20b.
Story; I purchased this motor from attarco almost 2 years ago. Had the motor stock for about 10K miles. Decided to go with the crower 403's and ive had them in for about 15K miles. This motor is very strong. Made good power for a non vtec motor and the only reason i took it out was because i went with a h2b. I babied the crap outa this thing. Mobil 1 full synthetic every 2500-3000k miles. I did a compression test before i pulled the motor out and it was 210psi across the board!!. Also timing belt and water pump was replaced when the motor was first put in, so about 25k on them.
What it will include:
Longblock, all sensors, dizzy, ect..
crower 403 cams
crower dual valve springs.
golden eagle cam gears
skunk2 intake manifold
gsr throttle body
stage 2 street disk, and 9lb flywheel.(clutch still grabs hard and has about 25k miles)
ROM with tune burned on it.
(will also include all stock stuff, cams, valvesprings, cam gears, ect.. minus the intake manifold.)
Tuned by Jeremy at RedZone, this is what it made:
I am looking for $800 obo for the long block and all listed above
--------------------------------------------------------------------------------------------
B series ANR Compact Header:
Very unique header and makes good power. Cant find too many of them anymore.
See the power it made on my motor above^^^^^ I know the welds look like sheit but the previous owner did that to strengthen it up but this header will not crack if you run a flex pipe
I am asking $350 obo for the header
--------------------------------------------------------------------------------------------
Random parts for sale:
Obd1 h22a egr valve.
Best offer
h22 manifold and heatsheild
Best offer
93 integra intermediate shaft, half shaft.
BEst offer
93 integra ls throttle body
Best oFFer
98 civic half radiator
Best offer
Maremont 2.5in Catalytic converter, used for 100 miles.
Best offer
MOunts for b series in EK
Best offfer!!
93 integra taillights, ok condition, one has 2 small cracks and other is good.(cracks in pic)
93 pr4 ls block,rods, crank, almost complete short block minus pistons because the ringlands are shot.
PIcs upon request( i have to dig the block out from under a bunch of stuff)
Best offer
93 integra da9 cluster, Illuminates a dark orange/red.
Any questions pm me or post Thanks!
Modified by watsvtecEK at 1:13 AM 2/29/2008
Modified by watsvtecEK at 9:30 PM 3/9/2008
Trending Topics
#11
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: around, ca, us
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay area: all motor b20b non vtec longblock, ANR header, misc parts! obo deals! (watsvtecEK)
ALSO
willing to trade for brakes, integra, 4x114, 5 lug.
seats, recaros, gsr, s2000 show me what you have.
willing to trade for brakes, integra, 4x114, 5 lug.
seats, recaros, gsr, s2000 show me what you have.
Thread
Thread Starter
Forum
Replies
Last Post
watsvtecEK
For Sale
21
03-22-2008 10:36 PM