B Series Leftovers- B18C/ITR/RC/Skunk2/Eagle/Blox
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2005
Location: CA
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
B Series Leftovers- B18C/ITR/RC/Skunk2/Eagle/Blox
RC SL9440cc OBD1
pending
http://www.flickr.com/photos/76489804@N08/6858134541/
95 B18C1 Bare Block
Sold
Eagle Crank 87mm for GSR
Brand new only layed in block for assembly, was sent wrong part #
Has been balanced
sold
http://www.flickr.com/photos/76489804@N08/6858157799/
http://www.flickr.com/photos/76489804@N08/6858162487/
http://www.flickr.com/photos/76489804@N08/6858167563/
Skunk2 Stage 2 w/Comp Cams Cam Gears
OG markings HO8IN/HO8EX
Cams still installed in motor so no cams pic yet,
but they are real and all markings are there.
$400 for cams w/gears
http://www.flickr.com/photos/76489804@N08/6860551555/
Blox IM for B18C- Sold
ITR TB all sensors good sold
Blox FPR $25
No shipping please.
Would prefer local meetup in Sac area or some weekends im in the bay also.
Thanks
pending
http://www.flickr.com/photos/76489804@N08/6858134541/
95 B18C1 Bare Block
Sold
Eagle Crank 87mm for GSR
Brand new only layed in block for assembly, was sent wrong part #
Has been balanced
sold
http://www.flickr.com/photos/76489804@N08/6858157799/
http://www.flickr.com/photos/76489804@N08/6858162487/
http://www.flickr.com/photos/76489804@N08/6858167563/
Skunk2 Stage 2 w/Comp Cams Cam Gears
OG markings HO8IN/HO8EX
Cams still installed in motor so no cams pic yet,
but they are real and all markings are there.
$400 for cams w/gears
http://www.flickr.com/photos/76489804@N08/6860551555/
Blox IM for B18C- Sold
ITR TB all sensors good sold
Blox FPR $25
No shipping please.
Would prefer local meetup in Sac area or some weekends im in the bay also.
Thanks
Last edited by ef1.8; 02-22-2012 at 11:12 AM.
#6
Re: B Series Leftovers- B18C/ITR/RC/Skunk2/Eagle/Blox
Can i get a part# on that 87mm Eagle crank?
It states there on your post that you were sent the wrong part#? What happened with that?
The cranks already been balanced? Can i get a contact # so i can call you.
I'm rather confused here.
It states there on your post that you were sent the wrong part#? What happened with that?
The cranks already been balanced? Can i get a contact # so i can call you.
I'm rather confused here.
#7
Honda-Tech Member
Thread Starter
Join Date: Mar 2005
Location: CA
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Re: B Series Leftovers- B18C/ITR/RC/Skunk2/Eagle/Blox
let me explain-
The crank was ordered brand new as an 89mm ls crank.
(I would normally never use an aftermarket crank for an oem stroke in an allmotor ap, but at the time I absolutely couldnt get my hands on any useable honda 89mm)
Came new in the box labled as ls/b20 p/n 1835041772.
Trusting this and much to my dimise while being pressed for time, I rushed this to the shop that did my bore/hone for balancing where they already had the rest of my rotating assy. I believe they had no idea the crank was not the right p/n because I supplied my parts to only be balanced, not for assy. I believe everything was weighed and weights were attatched for the balancing as opposed to assembling the rods to the crank if you follow me.
When I started mocking up the motor I immediately found the big end journals were too small. After many emails over whos fault it was, and with the crank already being reworked, it was mine for keeps regardless of the screw up. Lesson learned, measure your stuff ahead of time no matter what!.
Ill pm you some back and forth email between the people I purchased this from/eagle/and myself if youd like. We found my crank to be p/n 1834331772 for b18c.
Thanks
The crank was ordered brand new as an 89mm ls crank.
(I would normally never use an aftermarket crank for an oem stroke in an allmotor ap, but at the time I absolutely couldnt get my hands on any useable honda 89mm)
Came new in the box labled as ls/b20 p/n 1835041772.
Trusting this and much to my dimise while being pressed for time, I rushed this to the shop that did my bore/hone for balancing where they already had the rest of my rotating assy. I believe they had no idea the crank was not the right p/n because I supplied my parts to only be balanced, not for assy. I believe everything was weighed and weights were attatched for the balancing as opposed to assembling the rods to the crank if you follow me.
When I started mocking up the motor I immediately found the big end journals were too small. After many emails over whos fault it was, and with the crank already being reworked, it was mine for keeps regardless of the screw up. Lesson learned, measure your stuff ahead of time no matter what!.
Ill pm you some back and forth email between the people I purchased this from/eagle/and myself if youd like. We found my crank to be p/n 1834331772 for b18c.
Thanks
Trending Topics
#15
Re: B Series Leftovers- B18C/ITR/RC/Skunk2/Eagle/Blox
so that b18c is just the bare block right. Where can i get a crankshaft for it. i'll buy it but can't seem to find a crankshaft.
#16
Honda-Tech Member
Thread Starter
Join Date: Mar 2005
Location: CA
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Re: B Series Leftovers- B18C/ITR/RC/Skunk2/Eagle/Blox
Im selling an eagle crank listed above.
Prefer not to ship, but ive been to ups store with it for a quote so its already packed.
Block is pending sale this morn tho.
Thx
Prefer not to ship, but ive been to ups store with it for a quote so its already packed.
Block is pending sale this morn tho.
Thx
Thread
Thread Starter
Forum
Replies
Last Post
Spawne32
Classifieds: Forced Induction
2
07-18-2013 10:16 AM