B SERIES/EK PARTS FOR SALE
#1
Junior Member
Thread Starter
Join Date: Dec 2003
Location: Dirty Jersey, USA
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
B SERIES/EK PARTS FOR SALE
B SERIES PARTS FOR SALE
--------------------------------------------------------------------------------
Have complete, but disassembled GSR for sale.
motor spun a rod bearing, will need crank and one rod to be safe.
Had 7k on motor when bearing spun. had all new parts/seals installed when
motor was built. Will part out or sell complete.
MAKE OFFER ON ALL PARTS..NO RESONABLE OFFERS REFUSED!!
Block is bored .025 over, has ARP head studs (could use a good hone)
CTR pistons stock rods (7k miles)
GSR Head has stock valves, 3angle valve job, rocket valvetrain SOLD
skunk2 stage 2 cams (7k miles)
SRR cam gears (7k miles)
skunk2 IM w/ LS TB, type r throttle cable and bracket (for gsr) SOLD
RC 310 injectors SOLD
B&M fuel pressure guage, AEM FPR (silver) (7k miles)
SMSP Header with 2.5in collector SOLD
2.5 headerback exhaust for civic hatch, can only be used with SMSP header
w.out being modded. HKS hipower muffler, all once piece, under axle design
exhaust made 25whp over smaller exhaust/dc header (tuned) 15whp (with previous tune)
B16 trans no grinds SOLD
ACT lightened flywheel
P91 ECU, same as P28...tuned by Jeff Evans with neptune SOLD
have Bseries shiftlinkage with skunk2 short shifter
96-98 GSR ECU
AutoMeter AIR FUEL guage all black face/bezel
also have 2 15x7 Kosei K1's in silver with 205/50r15 BFG drags
Rims are MINT. Tires have plenty of life left...
99-00 Skunk2 OBD2 - OBD1 conversion harness
OEM CTR folding mirrors 96-00 Civic (non power) SOLD
SRR rear camber kit for civic
MAKE OFFERS ON ALL PARTS...RESONABLE OFFERS NOT REFUSED!!
LOWBALLERS DONT WASTE MY TIME
EMAIL IS KEY---Grimace.ej6@gmail.com
Modified by Grimace EJ6 at 1:08 AM 8/21/2005
Modified by Grimace EJ6 at 1:20 PM 10/1/2005
Modified by Grimace EJ6 at 10:36 AM 10/4/2005
Modified by Grimace EJ6 at 10:37 AM 10/4/2005
Modified by Grimace EJ6 at 10:14 PM 10/9/2005
Modified by Grimace EJ6 at 8:46 PM 10/25/2005
Modified by Grimace EJ6 at 10:16 AM 11/8/2005
--------------------------------------------------------------------------------
Have complete, but disassembled GSR for sale.
motor spun a rod bearing, will need crank and one rod to be safe.
Had 7k on motor when bearing spun. had all new parts/seals installed when
motor was built. Will part out or sell complete.
MAKE OFFER ON ALL PARTS..NO RESONABLE OFFERS REFUSED!!
Block is bored .025 over, has ARP head studs (could use a good hone)
CTR pistons stock rods (7k miles)
GSR Head has stock valves, 3angle valve job, rocket valvetrain SOLD
skunk2 stage 2 cams (7k miles)
SRR cam gears (7k miles)
skunk2 IM w/ LS TB, type r throttle cable and bracket (for gsr) SOLD
RC 310 injectors SOLD
B&M fuel pressure guage, AEM FPR (silver) (7k miles)
SMSP Header with 2.5in collector SOLD
2.5 headerback exhaust for civic hatch, can only be used with SMSP header
w.out being modded. HKS hipower muffler, all once piece, under axle design
exhaust made 25whp over smaller exhaust/dc header (tuned) 15whp (with previous tune)
B16 trans no grinds SOLD
ACT lightened flywheel
P91 ECU, same as P28...tuned by Jeff Evans with neptune SOLD
have Bseries shiftlinkage with skunk2 short shifter
96-98 GSR ECU
AutoMeter AIR FUEL guage all black face/bezel
also have 2 15x7 Kosei K1's in silver with 205/50r15 BFG drags
Rims are MINT. Tires have plenty of life left...
99-00 Skunk2 OBD2 - OBD1 conversion harness
OEM CTR folding mirrors 96-00 Civic (non power) SOLD
SRR rear camber kit for civic
MAKE OFFERS ON ALL PARTS...RESONABLE OFFERS NOT REFUSED!!
LOWBALLERS DONT WASTE MY TIME
EMAIL IS KEY---Grimace.ej6@gmail.com
Modified by Grimace EJ6 at 1:08 AM 8/21/2005
Modified by Grimace EJ6 at 1:20 PM 10/1/2005
Modified by Grimace EJ6 at 10:36 AM 10/4/2005
Modified by Grimace EJ6 at 10:37 AM 10/4/2005
Modified by Grimace EJ6 at 10:14 PM 10/9/2005
Modified by Grimace EJ6 at 8:46 PM 10/25/2005
Modified by Grimace EJ6 at 10:16 AM 11/8/2005