93 eg hatch shell, fully built long block, turbo setup, tuck harness
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Location: New Castle, Pa
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
93 eg hatch shell, fully built long block, turbo setup, tuck harness
i have a 93 civic hatch shell i am selling its from florida so its very clean, carbon fiber hood, painted bay, wire tucked shaved, rywire brake line tuck, battery relocation, moroso killswitch, personal steering wheel nrg quick release and hub, itr knock off seats, slipstreams with new tires, 750hp fuel system walbro 255 paired with a bosch 044. Thats a list of what i can think of off the top of my head. $2500 firm for the shell.
I also am selling my swap gsr golden eagle sleeved 84.25mm, je custom pistons not off the shelf, pauter rods, itr oil pump with cryo treated gears, b16 head full ferrea valve train, 1mm over sized valves, skunk 2 tuner 3 cams, edelbrock intake manifold port matched to 70mm, bdl 70mm throttle body, bdl fuel rail. clutch is a carbonetics carbon/carbon twin disc. b16 tranny will come with axles as well. Also comes with a b&r fittings 1 gallon catch can hoses and the fittings are already in the block. $5500 for the swap pretty firm on that price. I have way more money than 5500 invested.
The turbo setup is a precision 6765 81ar t4, top mount mani divided with 44mm flanges, 2 precision 46mm wastegates, custom back door ic, 3inch cold side piping tial q bov, 4" downpipe and i'll throw in the 4" aluminum exhaust off my eg to complete the package. $3000 price is some what flexable.
lastly i have tuck harness thats obd1 it has fuel injector clinic clips on it. milspec quick disconnet, charge harness, has everything you need and is brand new never installed. $600 price is pretty firm
I can send pictures of the swap and turbo stuff im only putting up pictures of the shell. But everything i have is quaility and legit. 724-944-5660 name Tyler not excepting any trades getting out of hondas completely.
I also am selling my swap gsr golden eagle sleeved 84.25mm, je custom pistons not off the shelf, pauter rods, itr oil pump with cryo treated gears, b16 head full ferrea valve train, 1mm over sized valves, skunk 2 tuner 3 cams, edelbrock intake manifold port matched to 70mm, bdl 70mm throttle body, bdl fuel rail. clutch is a carbonetics carbon/carbon twin disc. b16 tranny will come with axles as well. Also comes with a b&r fittings 1 gallon catch can hoses and the fittings are already in the block. $5500 for the swap pretty firm on that price. I have way more money than 5500 invested.
The turbo setup is a precision 6765 81ar t4, top mount mani divided with 44mm flanges, 2 precision 46mm wastegates, custom back door ic, 3inch cold side piping tial q bov, 4" downpipe and i'll throw in the 4" aluminum exhaust off my eg to complete the package. $3000 price is some what flexable.
lastly i have tuck harness thats obd1 it has fuel injector clinic clips on it. milspec quick disconnet, charge harness, has everything you need and is brand new never installed. $600 price is pretty firm
I can send pictures of the swap and turbo stuff im only putting up pictures of the shell. But everything i have is quaility and legit. 724-944-5660 name Tyler not excepting any trades getting out of hondas completely.
#4
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Location: New Castle, Pa
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93 eg hatch shell, fully built long block, turbo setup, tuck harness
t4 divided topmount twin 44's make me an offer i have a matching 4" downpipe that goes with it was gonna be used with the 6765 pictured above.
#7
Honda-Tech Member
Join Date: Feb 2008
Location: Chambersburg, PA, USA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93 eg hatch shell, fully built long block, turbo setup, tuck harness
What model is the shell? I assuming you can throw in a motor and everything is wired and ready to go?
Thanks,
Staats
Thanks,
Staats
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Location: New Castle, Pa
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93 eg hatch shell, fully built long block, turbo setup, tuck harness
Sale is pending on the shell dude is supposed to pick it up tomorrow and then were doing the title work Monday morning
#10
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Location: New Castle, Pa
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93 eg hatch shell, fully built long block, turbo setup, tuck harness
sale is pending on the long block, but im gonna put up some pictures of some more stuff i have for sale.
b16 tranny mint no grinds no pop outs $500
carbonetics twin disc carbon/carbon $1200
b16 tranny mint no grinds no pop outs $500
carbonetics twin disc carbon/carbon $1200
Thread
Thread Starter
Forum
Replies
Last Post
nolicense526
Northeast (Sales)
3
11-01-2010 02:07 PM